Garage Door Spring Accident | Learn about Garage Door Springs Injuries


Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

Garage door maintenance is necessary and mandatory, as it strives to avoid hazards and accidents, which are not something that communities of neighbors or garage owners want to experience. In these types of setups, an accident might occur due to both a poor garage door openers installation and insufficient or, in many cases, nonexistent maintenance, resulting in catastrophic consequences for the surrounding neighborhood. In this guide, I will discuss the garage door spring accident.

An automatic garage door working well will prevent not only garage door accidents but also costly failures. Because the proper operation of this type of device can prevent up to 80% of door malfunctions, it’s critical to engage a reputable organization with prior experience in the field.

Learn More: How To Paint A Roll Up Garage Door

Although automatic garage doors provide convenience and technology at the service of modern life, it is also necessary to consider the major risks that come with this device.

  • Because a human, animal, or item may be in danger during the operation of the device. So, it is critical to install photocells, sensitive floors, or anti-crushing strips to detect any impediment.
  • Because of the risks you have with electric drives that might cause fires due to over-current or over-voltage, automatic garage doors must have short-circuited protection.
  • The automatic door could collapse due to the pressure produced by strong winds.
  • Sliding or swinging doors that move horizontally derail.
  • When the door reaches its limit position after its travel, it does not immediately stop.
  • The remote control has stopped working.

Accidents caused by automatic garage doors can be predicted and thus avoided if the motors are of good quality, have internal force regulation, anti-crushing, and an “encoder” system that retracts when it comes into contact with an object.

Learn More: How To Make Wooden Garage Doors

When it opens or closes, it creates a lot of noise.

Noise comes during the process of opening and closing the door. While all garage doors create noise when they operate, if the noise becomes severe, it is clear that some of the parts of your garage door will need repairs.

After installation or with the last inspection, checking the operation and noise is one technique to see if you have a problem. A multitude of factors can cause noise. When the springs become damaged, for example, you may hear a grating or rattling noise when opening and shutting the door.

Similarly, if you hear a popping sound while operating the garage door, it signifies that some sections are unable to open smoothly. If your garage doors make squeaking, creaking, or rattling noises, inspect the hinges, rails, and torsion springs. You can repair or install a garage door spring replacement as needed.

It’s worth repeating that regular garage door inspection and maintenance is the greatest way to avoid any mishaps or hassles in your house. If any of the above apply to your garage door, don’t hesitate to contact our professional garage door repair experts for a quick and effective solution.

Read More: How To Reset A Craftsman Garage Door Opener

The Secrets of Garage Door Torsion Springs

The Secrets of Garage Door Torsion Springs

In North America and Europe, sectional garage doors account for nearly all garage doors. They are equipped with a counterbalance system that allows them to operate.

The counterbalance is provided by a torsion or extension spring system. Both systems are constructed of galvanized steel and are rolled into coils.


Order torsion springs whenever possible if you have the necessary tools and clearance. This technique is a little more expensive up front, but it will save you a lot of money in the long term. It will improve the safety of your garage door system for you and your family.

You can choose fully galvanized springs for any system. It’s best to use them in regions with high humidity, such as washing your car inside the garage frequently.


It is sufficient to use a canned lubricant specifically intended for this type of maintenance for both systems. Use it every time you have your yearly inspection to lengthen the life of your springs.

It’s available from garage door specialists. If you don’t have the right lubricant, a little motor oil can suffice (10W30).

In the event of a breakage

If something breaks, don’t try to fix it yourself. It’s all about your well-being. Keep in mind that the counterweight system (lower door hinge + lifting cables + spring system) bears the door’s entire weight.

If you have any questions regarding the explanations offered in this blog, contact a garage door technician and professional. You can also get a quote via the internet.

Dangers of Garage Door Spring Repair and Replacement

Dangers of Garage Door Spring Repair and Replacement

If you’ve come this far, it’s because you’re asking yourself, “What can I do if my garage door isn’t working properly or is broken?” Keep reading if you want a straightforward solution.

We urge that repairs be performed by a qualified specialist, although some breakdowns are simple to fix as long as we don’t jeopardize our integrity in the process. We hope that by reading this text, you will be able to recognize the door’s collapse quickly.

We’ve included some pointers on fixing the most common problems with automatic garage doors and how to diagnose the problem and remedy it in the simplest and most effective method possible.

Types of Garage Door Springs

Types of Garage Door Springs


  • This spring system is installed above the door head and is connected to the lifting wires through a tube.
  • If the spring breaks, it will remain trapped in this tube rather than falling to the ground.
  • The support plate in the center of the door bears the whole weight of the door, emphasizing the importance of properly installing this remains inside the garage.
  • Double doors (e.g., 4.9 m / 16 ft wide) are the best choice.
  • Standard movement requires 12 inches of clearance above the door (30 cm).


  • The horizontal rails have this spring mechanism installed. As a result, two springs serve as counterweights.
  • Even if they work for the same door weight, each spring acts independently.
  • As a result, using this sort of spring on a manually operated double garage door is not smart enough.
  • If one of the two springs fails, it is strongly advised that safety cords be installed. These wires are separate from the lifting garage door cables, and an accident occurs, the safety cable will keep the spring from hitting the wall.
  • For normal movement, a clearance of 20 cm (8 in.) is necessary above the door.
  • Reasons Why Garage Door Springs Fail
  • Your garage door is the most common entry and exit in ordinary residential homes.
  • As a result, a garage door is prone to malfunctioning from time to time. Energy outages are the most typical cause of problems in the winter. These issues are all too familiar to northern homeowners.
  • When an overhead garage door isn’t working properly, the problem could be caused by various factors.
  • It’s vital to know the most prevalent reasons for each problem and whether you need to call a professional if you have a garage door that won’t open all the way or a garage door that won’t open manually.

Blocked, dirty, or misaligned sensor

A photo block could be the cause of your garage door not closing entirely. This safety feature is there on most garage doors since the early 1990s.

Power is not getting to the opener.

When a garage door doesn’t open or close, it’s usually because the opener doesn’t have enough strength. A power cord that you may adjust is almost always causing the problem in the funniest instances.

While departing the garage through the house’s inside entrance, you may have unintentionally unplugged the opener. People are prone to doing such things and then forgetting about it.

Batteries for dead transmitters

When it comes to garage door actuation, both ends must have electrical access. As a result, the opener isn’t the only thing that could be taken from a power supply.

If your garage door doesn’t open when you use the remote, it could be due to a dead battery in your remote transmitter.

Frequently Asked Questions

Is replacing a garage door spring Dangerous?

When replacing garage door springs, it’s critical to avoid some of the most typical errors. Ensure you don’t make any mistakes when replacing garage door springs, whether they’re tension springs or extension springs. Garage door spring accident is more likely here.

Can garage door springs kill you?

Torsion springs make the garage door work under great tension and can cause injuries or death even when slack.

What happens when a spring breaks on a garage door?

The torsion spring above the door and serves as a counterweight is broken on a garage door. The springs are above the horizontal tracks in an extension spring system, and one of the springs doesn’t work well.

How many people have died from garage door springs?

Although there is no exact figure, a garage door that has been neglected is more likely to cause a garage door spring accident.

Can I open my garage door with a broken spring?

If one of these springs breaks, the garage door loses its stability, and you risk damaging it if you try to open it normally.

Should I replace both garage door springs?

While a simple repair may be all that you need to address a problem with your garage door, more significant issues may necessitate replacing the door and opener. If you’re replacing a garage door system, you’ll probably need to change everything else as well.

How can I lift my garage door without a spring?

It is easier to manually open a garage door from the inside than from the outside. If your garage door has the only entrance to go in and out of your garage, you will need to hire professionals to open it.

How long do garage door springs usually last?

They’re springs that can persist for several life cycles but decay over time.

Can I replace the garage door spring myself?

Yes, whether it’s a sectional, hinged, industrial, or other model, we’ll need accurate data to do this function. As we’ve previously stated, it is required to make it, order it from the manufacturer, and then have it work properly.

Why did my garage spring break?

Maybe it is because of a lack of maintenance and wears over time.

What does a broken garage spring look like?

Torsion springs, cable brakes, and other items attached to springs and cables are all under a lot of pressure.

Does garage door torsion spring length matter?

It’s critical to realize that garage door springs are there to open and close the door. So, yes!

How many turns on a garage door spring?

Turn the first tensioning iron ¼ turn to tension the spring.

How do I know if the garage door spring is broken?

The tension of the torsion spring, positioned in the adjustment collar on top of the garage door, governs the mechanism’s closing and opening.

Bad Garage Door Springs! Why You Shouldn’t Repair Them Yourself?

That means that you must repair your control if your controller’s response time is one of the symptoms when you try to open the door. If you figure out that your garage door is taking longer than usual to open or close, or if it is jerky when opening or closing, you should thoroughly inspect the garage door springs and other components.

When dealing with this issue, it’s best to grease the rollers and hinges so that the door closes and opens smoothly and without interruption. If the garage door still has a slow reaction time, you may need the assistance of a professional garage door repair specialist to do a thorough check and determine the source of the problem.


The two most fundamental options for dealing with time’s wear and tear are maintenance and repairs. Are all maintenance and repairs, on the other hand, equally effective?

All automated doors require assistance, and because they are not all the same, the technique and components may vary. Depending on the conditions, you should do maintenance frequently since hard handling will decrease the time between inspections. We hope this article has clarified to you about the garage door spring accident.

Comments are closed.