Garage Door Starts to Close then Goes Back Up | Reason Behind It & Fixing Guide


Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

The garage door is something we use as a daily entry and exit in an ordinary residential home. As a result, a garage door is prone to malfunctioning from time to time. Power outages are the most typical cause of problems in the winter. These issues are all too familiar to northern homeowners. The garage door starts to close then goes back up but why this happens? Read the full post to learn why the garage door starts to close then goes back up.

When a garage door isn’t working properly, the problem could be caused by various factors. It’s vital to know the most prevalent reasons (even weather effects) for each problem and whether you need to call a professional if you have a garage door that won’t open all the way or a garage door that won’t open manually.

Roll-Up Garage Doors and Sectional Roll-Up Doors

Roll-Up Garage Doors and Sectional Roll-Up Doors

Garage roller doors that are made to order

One of the first benefits you will notice if you choose this automatic door is that it will always be custom-made for you, to the extent that you desire, and that will unquestionably fit the gap in your garage.

They don’t take up a lot of room.

These roll-up doors have a very simple mechanism. The door retracts and stays on the ceiling as soon as you click the button on your remote control. As a result, it will not take up any space in your garage. It will not occupy any of the available parking places if there are numerous.

Designs that is pleasing to the eye

Because your garage door is frequently the initial point of contact with your home, you should never overlook its aesthetic value.

How to Set Limits on Genie’s New Garage Door Opener Line

How to Set Limits on Genie's New Garage Door Opener Line

Before modifying your garage door opener’s trip limits and force settings clear the previously saved open and shut travel limits from the main unit’s power memory. To check that the journey restriction setting has been cleared, press and hold the “open” and “close” buttons on the main unit power control panel until the green indicator light blinks.

Overhead Garage Door Sensor Replacement

  • Look for any physical obstructions to the sensors’ visibility. This includes any debris or dust that has accumulated on the lens. Sensor lights may indicate that the sensors have problems, depending on the sensor model.
  • Double-check that the sensors are in the right place. Tighten the bolts holding them in place if necessary, or replace the fasteners entirely.
  • Ascertain that the unit is powered on and that the sensors are receiving power. Check the electricity to the main component of the machine if the lights on the sensors do not come on.
  • Check the wires connecting the sensors to their connections at the main and the sensors. If the wires are worn or broken, you should replace them.
  • Remove the sensor units and open them. Activate the sensor units. Ensure the wiring is in the right place, there are no foreign things within, and that everything is dry.
  • Finally, if nothing else seems to be working, try replanning.

Typical Garage Door Opener Issues

Typical Garage Door Opener Issues
  • The sensor is blocked, filthy, or out of alignment.
  • The operator isn’t getting any power
  • Dead transmitter batteries
  • Broken garage door extension springs or twisting garage door
  • Cables in a tense situation
  • Misaligned sensitivity
  • The remote signal is obstructed
  • Incorrectly changed the limit setting

What is the Procedure for resetting my garage door motor?

What is the Procedure for resetting my garage door motor?
  • The door should be in an open position.
  • Release the emergency cable.
  • Return the garage door to the down position by manually moving it.
  • Pull the emergency release cord in the direction of the door.
  • Reattach the trolley to the carriage of the opener.

Is it necessary to reconfigure the garage door remote control after changing the battery?

Following Battery Replacement

As a result, homeowners may need to reset the garage door opener when the batteries are changed. Although not all garage door openers require reprogramming following battery replacement, many of the types in use today must.

Is it also possible to program two garage door openers? Unfortunately, most remote controllers do not allow you to set one button to activate two doors at once. Also, if you have two distinct garage door opener models in your house, make sure your remote works with both of them. Original remotes may not function with all models; however, universal remotes may.

What is the best way to fix a garage door that closes and then reopens?

What is the best way to fix a garage door that closes and then reopens?

It is possible that the keypad will not function properly at times. You may notice that certain access codes function properly while others do not. If your access codes aren’t working regularly, you may need to reset them. In some cases, this can be performed quickly by consulting the owner’s manual. If that doesn’t work, you should seek the assistance of a gate and door expert.

Someone else may have mistakenly modified some settings if some access codes work, but others don’t. You can also resolve this by consulting the owner’s manual.

It’s time to call a gate specialist if you discover that access codes aren’t working dependably or there appears to be no rhyme or reason for when they do or don’t operate. It’s possible that the keypad isn’t working properly due to wiring issues or other electrical issues. The above tips are important to solve the garage door starts to close then goes back up.

What is the best way to repair a garage door that keeps going up and down?

What is the best way to repair a garage door that keeps going up and down?

There could be harmful to other hardware on your gate if the electric gate does not swing or move smoothly. Make that the swing arms, hinges, and gate chains aren’t loose, corroded, or dusty. Therefore, if you don’t handle these issues immediately, the gate and your property may suffer catastrophic harm.

Possible Causes of Your Garage Door Hitting the Floor and Then Rising

Possible Causes of Your Garage Door Hitting the Floor and Then Rising

This is another common issue with sliding doors. One theory is that the motor’s anti-crushing system detects a small impediment and believes it is about to run over someone. 

In any event, these are just a handful of the many reasons why a garage door may be malfunctioning.

The Most Serious Issue with Garage Doors

The Most Serious Issue with Garage Doors

The gate construction and working mechanisms will be damaged by automobile accidents, tree collapse, and vandalism. The remedy is also expressed in an external repair of the gate structure in such circumstances. Welding and gate or gate hinge manipulation are used to complete the work. This is the main cause of the problem of garage door starts to close then goes back up.

Frequently Asked Questions

What causes my garage door to bounce back up?

This is a common problem with sliding doors. One theory is that the shaft and motor’s anti-crushing system detect a small impediment and believes it is about to run over someone. It’s also possible that this system is failing. Check the motor shaft too to make some adjustments.

Why does my garage door keep stalling in the middle of its closing process?

The photocell or any other safety sensors could be the source of the problem. In actuality, the safety features’ purpose is to ensure that the door may be safely closed. As a result, it’s fairly uncommon for the door to open smoothly yet not close properly.

Why does my garage door open by itself?

When the batteries on your garage door opener die the garage door may open on its own. You may check this by opening the garage door with the transmitter connected. Replace the batteries, and you’re good to go if this works, but your remote control doesn’t.

Is it necessary to press the button to close the garage door?

No, if you have to do this, the logic board may be malfunctioning. You can remove it, but be careful when disconnecting the cables, and make a sketch or photograph of it first.

How can you know if you have a broken torsion spring?

Each side of the door has two springs in the California-style roll-up. You can replace these springs on your own. Open and hold the door open, which will be tough. The door will slam shut if you remove whatever is holding it open.

There are many various types of springs, so be sure you get the right one. Physical strength is all you need to change. They are primarily available on wood doors. When they dry out, absorb water and then dry out again until they are nearly twice their original weight. Therefore, the additional weight causes the springs and openers to break.

Can you tell me why my garage door only opens afoot?

There’s only one reason why a garage door won’t open or close: the opener has no connection to the power supply. If a power cord is not there properly, it almost always causes the problem in the funniest instances. While departing the garage through the house’s inside entrance, you may have unintentionally unplugged the opener. People are prone to doing such things and then forgetting about it.

What does it imply if one garage door sensor is red and the other is green?

It could be a problem with the remote control’s battery. The first step in troubleshooting is to ensure that your clicker’s batteries are in good operating order. You can also use the wall switch to open the door.

The next step in troubleshooting is to double-check the garage door opener’s connection. These operate on electricity and might be out of power. If the device has its plug, and it is well, check to see if the fuse is working. This may cause the door to close without commands.

Why does my garage door keep reversing?

It’s one of the most common breakdowns, and there are two main causes: a problem with the door’s operating knob. Sometimes, believe it or not, the cause is as simple as the remote control running out of batteries. Make sure there is a battery in the knob. It may be malfunctioning if its charge is not 100%. In this scenario, the best course of action is to call a professional who can confirm that it does not work and repair it with full guarantees.

You will get a signal receiving equipment that isn’t working properly. The repair, like the remote control, is possible if a professional does it. However, it’s possible that it’s not malfunctioning and that the interference prevents the waves from arriving. You can see a control panel on the majority of garage remote controls. You can use the input push button on this box to see if the problem is interference.

Bottom Line

The majority of your interactions with your electric or automatic door should be simple and painless. However, just like anything else, electric gates can and will develop issues that affect their performance. These issues might range from simple to complex, requiring the assistance of a professional to do the necessary repairs.

We hope you got a clear idea of Garage Door Starts To Close Then Goes Back Up.

Comments are closed.