How to Balance a Ceiling Fan | 6 Ways to Balance Ceiling Fan


Articles, products, and services offered on this site are for informational purposes only. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before acting based on anything you read or see.

Did you have trouble balancing the ceiling fan? You must do this correctly; otherwise, you could do more harm than good. A vibrating or unbalanced fan can damage the fan motor. It can also damage your ceiling and prevent the benefits of airflow that the fan should provide. Let’s learn how to balance a ceiling fan.

An unbalanced fan can also make excessive noise. An unbalanced fan is a special problem in the bedroom, as noise can interfere with good sleep.

How to Balance a Ceiling Fan

How To Balance A Ceiling Fan

When the ceiling fan blade is wobbly and unbalanced, it can make strange, annoying noises and significantly reduce efficiency. Your ceiling fan should rotate straight and precisely to ensure maximum air circulation. If you have a reversible ceiling fan blade, here’s a handy guide to helping you get it back into balance.

Turn off the power

If you are installing a new ceiling fan and need to balance it or trying to correct an imbalance in an old ceiling fan, you must first make sure that you have turned off the main switch of your ceiling fan. Once you’ve done that, test it on and off several times.

Check the ceiling fan blades.

Before balancing the ceiling fan, visually inspect all blades to make sure none are bent or damaged. It’s possible that one of the blades needs to be changed if it’s damaged.

If so, you will probably need to call the fan manufacturer because most DIY stores do not offer replacement parts. Also, make sure that none of the blade screws are loose. If the screws are loose, tightening them may solve the problem.

Measure the blades

Before you start balancing blades, find out which blades are unbalanced. You can do this by holding the meter close to the ceiling and measuring the distance between the ceiling and each blade.

The distances should be the same, but one or more of them are not horizontal because the ceiling fan is swinging. Find out which blades are not horizontal and temporarily mark a small tape on the blade.

Balance the blades

Use the balancing kit that came with the ceiling fan, or place the metal pads half the length of the blades you want to level. Using the kit that came with the ceiling fan usually includes a clip for attaching weights to the blade. If you use pads, stack them so that the blade lowers to the correct measurement level and tape them to the top of the blade.

Test the fan

Once you have placed the weights or pucks, test the fan by turning it on to see if the oscillation has improved. If so, you’re done. However, if the fan is still swinging, you will need to place a balancing weight from the kit or several pads on the other blades until the ceiling fan is balanced. Keep moving balance weights or puck until you find the right weight and the best way to spread it. 

Balancing sets and heavy blades

You will find a ceiling balancing kit to buy blades for high loads. You can buy them online or at most DIY stores. Simply follow the directions that came with your new ceiling fan to learn how to balance it. It is important to note that some fans require a separate blade balancing kit.

Some manufacturers include blades and hubs in the purchase price of the fan. Others will charge extra. If you have an expensive ceiling fan, it pays to buy a blade balancing kit.

You will want to make sure that you do this step exactly. Of course, you can also pay for installing a fan, which should solve this problem.

If you want to know how to adjust the ceiling light, you must first follow the instructions that came with the light switch. It is usually located at the bottom of the device. You’ll need to unhook the power cord first for many light switch controllers.

The light switch controls will have marks that indicate the settings to which the outlet needs to be adjusted. For some switches, you simply set the power cord to the desired setting, and this setting matches the device’s appearance. You must first unplug the power cord and determine what settings the outlet box is set to for other switches. 

What is the Best Way to Stop the Ceiling Fan from Humming?

How To Balance A Ceiling Fan

Ceiling fans make a lot of noise, which may be very uncomfortable. Especially when you’re attempting to sleep at night, you must examine numerous factors to determine the noise source.

Electric current may be one of the issues. Ceiling fans don’t usually function with dimmer switches. This can generate unpleasant noises from the voltage regulator. To avoid this problem, replace the switch with a better one or use a fan chain to control it.

Because of insufficient lubrication, ceiling fans left standing for a long time can make a lot of noise. If the condition persists, special lubricating oil might be used.

Ceiling fans that spin at higher speeds vibrate more and make more noise. You can try putting it below to see if the sound is lessened.

One of the most common issues is loose screws. This is one of the simplest issues to resolve; simply verify sure they aren’t loose and tighten it.

The lamps can also be turned on and off. There would be vibrations as well. Also, ensure sure the bulbs are not touching anything by adjusting them. As a result, this contact prevents noise and unbalance.

Frequently Asked Questions 

What would cause the ceiling fan to swing in the first place?

  • Unbalanced fan blades or blade holders, 
  • blade misalignment, 
  • severe dust deposition, or 
  • Simply loose ceiling fan mounting cause ceiling fan variations. 

Restore your fan to its original state before using the moving parts.

Is it common for ceiling fans to sway when they turn on?

An anxious fan is not only disruptive and annoying but can be incredibly dangerous. A small wobble is normal, but if your ceiling fan shakes clearly, it can potentially fail at any time.

What is the cost of balancing a ceiling fan?

You may be able to balance the ceiling fan yourself, but if in doubt, call a professional. Expect to pay a service call of approximately $ 50 to $ 75 plus an hourly rate. If the birth is going well, the ventilator should only take 20-45 minutes.

What is a balancing kit for ceiling fans?

The blade balancing set consists of a plastic clip and three balancing weights. Most new fans include a balance kit; however, a ceiling fan balancing kit can be purchased cheaply. Take a look at the selection of accessories for Del Mar Fans and Lighting ceiling fans and get a set for balancing blades.

How far should the fan be able to swing?

Slight fluctuations of about 1/8 “during high-speed operation are normal. Anything can damage the fan and can be dangerous depending on the cause of the fluctuations.


It is important to note that installing a ceiling fan can be fun, because the finished product looks excellent, but if you’re wrong – and the fan or its blades aren’t balanced, you’ll have to fix the situation, of course. Buy a fan with fewer blades like this double-bladed beauty to alleviate this problem. Fewer blades mean less work.

If you have never installed one before, you should consider purchasing a ceiling fan installation kit. You can also hire someone to help you. If you want to be a brave soul balancing fan, make sure the engine is level and flush with the ceiling and blades are balanced.

Comments are closed.