How to Calculate Linear Feet for Kitchen Cabinets | Expert Guide
The most critical decision in planning and upgrading is the construction of your kitchens in your charming homes. I believe entirely in the proverb that” a stitch in time saves nine. This means that if you want your kitchen cabinets to be unique, impressive, and stylish in look, you should opt for the best material. The reason is, it is a one-time investment in your homes so that your cabinets will be useful for a more extended period. This article will be a useful piece of information because we will discuss how to calculate the linear feet for kitchen cabinets?
Although these measurements are unclear, you can get the estimated price at a low cost.
While calculating the linear feet of kitchen cabinets, there is an argument that linear feet are 12 inches of both upper and lower cabinets, but others do not believe in this point. For this purpose, the correct and most practical method is to calculate the upper and lower measurements separately. You should be clear about these before ordering the material.
What are Linear Feet?
Linear feet can be defined as the measurement in 12 inches, equals one foot long, and goes straight.
How to Calculate Linear Feet for Kitchen Cabinets
Steps to measure the linear foot for kitchen cabinets:
- Measurement of walls: Make a rough diagram of vertical walls where you want to make cabinets.
- Write the measurements on the paper.
Drawing of cabinets
- Draw the rough sketch of your planned cabinets, keeping in view the walls.
Measure by the side of walls
- Now measure the cabinet, where it begins, to the other corner where it ends.
- As we are doing the linear feet calculation, so it should be along the wall.
- Write the dimensions in inches.
- If you want to place the cabinets together, then sum the measurements of corners.
Measurement of additional walls
- Now measure the cabinets on the other walls, where they join at 90 degrees.
- Write these measurements.
Minus the allowances
- Where two cabinets merge at 90 degrees, minus the allowances.
- The standard allowance for the base cabinets is 24 inches and 12 inches for upper cabinets.
Allowance for the standing appliances
- Now minus the measurement of free-standing home appliances.
- The standard width is 30 inches for appliances.
- Write this measurement.
- The addition of relevant measurements should be done tocalculate linear feet for kitchen countertops.
- To get the linear footage, divide the relevant measurements by 12.
How to Calculate Square Feet?
- For the calculation of square feet, multiply the width by height, and divide by 144. For instance, if a base cabinet has a width of 36 inches and a length of 48, it will be 12 square feet.
- This is the measurement of the face of the cabinet.
- Now, if we talk about the kinds of wood options, there is a huge variety available in the market.
- The expensive options include imported hardwood, plywood, side mount hardware, raised panel doors.
- If you want to opt for midrange, there are maple ashes or red oak and, structural material is available.
- The affordable options include center- mount plywood slides and flat-panel plywood doors.
- The most affordable is the cheap option, including vinyl panel doors and single, center-mount slides.
In simple words, if you want to know how to calculate linear feet for kitchen cabinets, measure the lengths in inches and divide them by 12. For example, if your kitchen has two walls of equal size and width, i.e., 10’X10′, add them and divide it by 12; you will get 20 linear feet in total.
Measurement of kitchen cabinets in the standard kitchen of 10X10:
- If you have the standard kitchen of 10X10 and measure the cabinets by linear feet method, you will add the price twice and divide it by 20.
- In my opinion, you should not mislead the customers regarding price and cost because it is unethical.
- Many advertising companies do this very freely by offering 40 to 50 % off; this is fake because any company cannot offer the sale at this level every day.
Measurement of corner cabinets by linear feet method:
- For measuring the corner cabinets, put the end of the measuring tape at the backside of the one cabinet to the other side.
- Now repeat the same procedure for the second cabinet.
The benefit to Calculate Linear Feet
- The most crucial benefit of calculation by linear feet is that it will help determine how many cabinets you can make within your kitchen’s available space.
- So, there are many factors you have to consider, like the shape of cabinets, lengths and, heights of walls of your kitchen.
- Secondly, this method helps compare the prices if you want to sell the cabinets by linear feet.
Some important points:
- While calculating the linear feet, you should keep in mind the standard size of kitchen cabinets.
- The base cabinets should be 24 inches deep and 34 inches in length.
- The counter measurements should be 1.5 feet to make the height of 36 “.
- The upper cabinets should be 12 inches deep and 36 to 42 inches tall.
- The standard countertop height is 3 feet equal to 36 inches above the floor.
- When we have a standard kitchen of 10×10, the average linear feet of kitchen cabinet is 24.5 inches, and its cost is $1764 and ranges from 72$ to 104$.
- Similarly, if you want to make the measurement procedure very simple, then use the cabinet calculator. It helps calculate the measurements of essential sheets for the cabinets.
- The kitchen cabinet size calculator is used to measure the length of cabinets in inches on your wall, but the walls’ height is not included in this measurement.
- Price-wise, have a look at the cost of cabinets. The cheapest cabinets are 60$ to 200$ per linear foot, semi-custom cabinets will go around 100$ to 650$ per linear foot and, custom cabinets will cost 500$ to1200$ per linear foot.
- Last but not least is the cabinet square footage calculator; it helps speed up measurement. Like if you have a width of 70 inches and a height of 32 inches. Then enter these figures into the calculator, and you will get 15.56 square feet. It will be easy to understand the main measurements summarized in the table below.
|Standard linear feet||Joining of kitchen cabinets||Standard width for appliances||Base cabinets||Upper cabinets||Standard countertop height|
|12inches||90 degree||30 inches||24 inches deep and 34 inches long||12 inches deep 36-42 inches tall||3 feet|
Tips for Measuring Kitchen Cabinets
To ensure accuracy in measurements, you should use tape, graph paper, and tape.
You should measure the overall lengths and widths clockwise.
Space for the standing appliances:
While measuring the kitchen cabinets by linear feet method, leave sufficient space for the standing appliances.
Matching with the paint color:
It would help if you also kept in mind that what color you have on your kitchen walls.
Then you should select the type and color of wood, thus makes your kitchen unique and impressive.
The idea about the shapes and sizes of the kitchen cabinets:
Always keep in mind the sizes and shapes of cabinets you should opt for. This will help get a better idea to work with.
How to Calculate Linear Feet for Kitchen Cabinets: FAQ
What is the linear foot for cabinets?
The cabinet’s linear foot is the measurement of cabinets from wall to wall, for both the upper and lower cabinets.
This procedure for estimating prices was common when you want to build the kitchen cabinets with simple doors, shelves, and frames attached to the countertops and walls.
What is the standard width of kitchen cabinets?
The standard size of a kitchen cabinet with the countertop is 36 inches and without the countertop is 34.5 inches.
However, upper kitchen cabinets’ measurements can be 30 to 42 inches in height, 12 to 24 deep and, 9 to 36 wide.
How deep should upper cabinets be?
The most common measurement regarding the depth of upper cabinets is 12 inches. This measurement gives good space for storage and the workplace below the cabinet.
For microwave ovens, 15 to 18 inches deep, and 24-inch deep cabinet for refrigerators is very useful and common in use.
To conclude this topic, the discussion I will recommend that if you are planning your new kitchen, we have suggestions of the authentic experts, who are always ready to plan for free. The tips mentioned above will be very useful to know how to calculate linear feet for kitchen cabinets? But this information varies from place to place depending on your choice and budget. You should also keep in mind any specific features like windows, sinks, and depressed ceilings in the kitchen that can affect the height of the wall cabinets.
Read More: How High Should Range Hood Be From The Stove