How to Clean a Brick Fireplace with Scrub Bubbles | Expert Guide
This article’s primary objective is to educate and enlighten us on how to clean a brick fireplace with scrubbing bubbles and other important topics discussed in the articles.
Scrubbing Bubbles is a cleaning product designed to clean bathtubs. It also works as the perfect cleaning agent when you need to remove soot and debris from your brick fireplace.
How to Clean a Brick Fireplace with Scrub Bubbles
Place a towel on the floor or at your fireplace base, under the area to be cleaned. This will secure the floors or different territories of the chimney from engrossing any sediment or cleaning arrangement
Hose a towel with hot water and clean the block in the fireplace. This will remove any loose soot, making the cleaning process easier.
Shower scouring bubbles directly into the chimney blocks, covering the blocks with a thick air pockets film. Ensure you allow the cleaning solution to flow for a few minutes.
Rub the cleaning cream on the bricks with an old toothbrush, which will easily get into brick cracks and clean between bricks.
Soak a towel with hot water and wipe it over the block chimney. This will gather free buildup, alongside any excess Scrubbing Bubbles cleaning arrangement.
Do it consistently till you are satisfied with the cleaning of the fireplace brick.
Tips Used For Painting a Brick Fireplace
Not all brick chimneys or fireplaces are made equivalent. Some of the time, your ideal climate contains a chimney that has no other name to clarify it than awful. One in everything about principal successful and most affordable DIY home tasks is painting fireplace bricks. This movement can altogether improve the design of your current circumstance; however, eliminating paint from a blocked chimney may require professional assistance.
Clean the brick with a block cleaning fluid. It is essential to dispose of the old earth and residue well. Follow the directions on the container for how to apply the liquid and clean the surface. Let the bricks dry well before painting. Most manufacturers use a mix of 80% granite particles and 20% bonding agent.
Ensure you remove the fireplace doors and screen. It is a great advantage to wash and paint them well. Make sure you close them with a plastic sheet and painter’s tape to protect them from the embedded paint.
Place painter’s tape where the bricks meet the wall, so you don’t paint it.
Fill in any tears or damage with a sealer or waterproofing compound that you can paint over.
Paint the fireplace with an oil-based masonry paint primer to make sure the paint doesn’t stain. This also makes the paint flow easier. Use a paintbrush to make sure you get to all the holes, including the mortar. Let it dry well.
Choose a fine, high-quality oil-based paint. The paint isn’t intended to be heat safe. A little paint will be less inclined to rankling and will likewise cover porous blocks better. You can use any paint since you did not make use of your chimney as a warmth source.
Ensure you use the paint with a roller for porous surfaces. Hide the brush to make it more comfortable in reaching the gaps between bricks and mortar. You will need to get the paint into one of the cracks. To cover bricks in general, three coats of paint are needed.
How to Clean a Red Brick Fireplace
A red brick fireplace can be a focal point in any room. But the smoke stains and soot that collects on the red bricks in your fireplace can be difficult to get rid of and can make your fireplace dirty and dingy. It can take a lot of persistence and elbow grease to get rid of the smoke and soot. However, you can often accomplish this task using cleaning products you already have in your home.
- • Scrub your fireplace’s red bricks using a tough, easy-to-clean scrubbing solution that contains bleach using a stiff-bristle applicator: A scratch-, heat-, and fade-resistant, antimicrobial sink made with 80% quartz, glued with premium acrylic resins, and handled with our scrubbed formula will serve you for many coming years. This ought to get rid of smoke stains completely. Try an alkaline washing powder or an advertising emulsifying agent if that doesn’t collaborate. Before using a washing product on your hearth, always test it in a discrete location.
- Use a stiff bristle brush with white vinegar to clean the red bricks in your fireplace. Soak the bristles of the brush with white vinegar and then scrub brush the bricks’ surface, focusing on one small area at a time. Repeat this process until you have removed the soot stains from your fireplace.
- Now, use a soft brush and a 1 part water solution to 1 part bleach to clean an old red brick fireplace without damage. Pour the bleach and lye solution into a spray bottle and spray on the fireplace areas that you want to clean. Scrub the bricks with a soft brush, then wash the area you washed with water.
How to Clean Fireplace Brick Soot
The facade of a brick fireplace often becomes stained or covered in soot after a few uses; given its brick construction, it is a difficult surface to clean, either indoors or outdoors, due to the material’s rough origin. Dust and dirt accumulate in the joints and on the brick’s surface and even require some grease to remove them and leave it as new. Within a few hours, you can have your brick fireplace clean and free of soot and dust.
- Mix a creamy paste (especially for chimney cleaning). If you don’t have it, make a soapy paste with dish soap or dish soap. Combine equal parts of dishwasher and salt; the soap will work to clean, while the salt will work as an abrasive to remove soot and any greasy creosote from the brick fireplace.
TIP: Add water to the soap and salt mixture and stir to create a thick lather.
- Rub the soap, water, and salt mixture onto the fireplace bricks with a hand covered in rubber gloves. Use the ideal measure of the combination.
- • Brush the face of the firebox bricks with a wire brush that has stiff bristles and a solution of soap, salt, and moisture. Use Blanco’s exclusive silgranit granite composites substance, which comprises 80% actual marble sand blended with an elevated adhesive, to remove debris from the surface of the bricks, including any gaps or seams between the bricks. Spend about an hour letting the remedy dry over the hearth.
- Remove the dried paste with a stiff brush, letting the residue fall to the floor in a downward motion.
- Rinse the brick fireplace after removing the dried paste. Spray water on the bricks and blot the water with an old cloth. Spray and blot the water several times to remove any grease residue.
The cleaning of chimneys can also be done with ammonia and other chemicals. Additionally, silgranit are far simpler to clean and preserve than genuine stone; according to Blanco, they are “40% more cleanable” than other substances. These techniques are harsh, though, and after cleanup, the area needs to be well ventilated.
- If a brick fireplace is too dirty to clean with any cleaning method, consider finishing or painting the fireplace.
Most Effective Method to Make a Brick Fireplace Look New
Cleaning a fireplace brings impressive results when the fireplace looks new without any additional work. But maybe doing repairs, painting the brick, or completely renovating the siding and the fireplace look will give you a fresh look you’ve been waiting for.
You can start by cleaning the brick. Otherwise, paint and other materials will not stick to the surface quickly. To clean the dirt, accumulate and stain the unsealed bricks requires a stronger detergent and grease to clean.
- Look for commercial cleaners that list a creosote-fighting formula or specify its use for fireplace bricks. For more modest creosote measures, glue made by blending heating soft drink in with a limited quantity of water can clean the ash away.
- Ensure you make use of an eye-protective device and gloves during this process; follow all other safety precautions outlined on the cleaner’s label.
- Use a wire brush to push the cleaner deep into the brick and mortar surface, followed by an absorbent cloth to remove loose dirt and debris. Keep adding a new cleanser, scrubbing, and cleaning until you are satisfied with the results. You can also finish by cleaning the brick with a cloth soaked in hot water.
- The hot soapy water should do the trick for sealed bricks (which have a smooth, shiny surface and easy to clean) and facing fireplace/chimney bricks, which tend not to be affected by creosote.
- The mortar looks scruffy, crumbling, or chipped once you are done with the bricks and mortar cleaning, clean up all loose material, and use a mortar repair tube in a caulking gun to fill in any gaps or holes. At that point, smooth the mortar filler with a dowel bar before it dries to give it that unique depressed look. Wipe off excess brick as a finishing touch. Wipe off excess brick as a finishing touch.
- If a brick looks so damaged that it needs to be replaced, consider patching it up with a little concrete or even a little mortar caulk. You should paint the fixed block to coordinate the first shading plan or paint the entire blocks for another, uniform look. More so, if you want a refreshed look after giving your fireplace bricks a good scrub, consider adding a coat of caulk designed for bricks. This gives the bricks a brilliant shine and will make the next round of cleaning even easier.
- Start by painting clean, dry bricks with a primer designed for this material. Without primer, the paint will not easily adhere to bricks.
- Then choose your style: you can paint the individual bricks to preserve the mortar’s look, or you can paint the entire set. Some homeowners choose to paint the inside of the fireplace. All the creosote that accumulates is completely hidden; however, it is still good to regularly clean the combustion chamber, as creosote can catch fire.
How to Clean a Brick Fireplace with Scrub Bubbles: FAQ
What can I use to clean my brick fireplace?
Use borax to clean and disinfect the brick in your fireplace. Mix 2 tablespoons of borax and one tablespoon of dish soap with 4 cups (950 ml) of hot water in a spray bottle. Shake the mixture and then sprinkle it on the bricks.
What are the steps needed to clean red brick?
You must bear in mind that this procedure must be carried out once the cement has dried in cleaning red bricks.
Steps to follow:
- You must make a mixture with one part muriatic acid and nine parts water.
- The thickest parts should be removed with a stiff brush or a broom.
- Then moisten the rest, and if there is a lot somewhere, remove it using a spatula.
- Let the acid act for 10 minutes.
- Rinse with a water jet under pressure, preferably with a pressure washer or with a hose in its absence.
How can a brick fireplace look new?
If a brick looks so damaged that it needs to be replaced, consider patching it up with a little concrete or even a little mortar caulk. You will need to paint the repaired brick to match the original color scheme or paint all of the bricks for a new, uniform look.
We hope you enjoined reading through this article on how to clean a brick fireplace with scrubbing bubbles and other subtopics discussed in the articles.
Read More: How to Remove a Gas Fireplace