How to Clean Plastic Shower Floor | 9 Steps & You Are Done


Articles, products, and services offered on this site are for informational purposes only. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before acting based on anything you read or see.

Cleaning a shower is not easy, especially if you have a plastic floor. The best way to clean it is to mix vinegar and baking soda in a spray bottle, add warm water and use the spray bottle to wet the floor. Afterward, use dish soap and a cloth to remove any remaining dirt.

How to Clean Plastic Shower Floor

Some people may be hesitant to try this method because they think it will damage their shower floor or cause more harm than good. However, this method has been tested and proven safe on plastic floors. It’s also cheaper than replacing your shower floor with tile or other durable materials. However, let’s explore what we have to help you achieve this.

How to Clean Plastic Shower Floor

Step 1: Prepare the required items.

The shower floor is usually made of a plastic material which is difficult to clean. The best solution for this problem is to use vinegar, baking soda paste, a soft cloth, and a brush.

How to Clean Plastic Shower Floor

The baking soda paste should be applied on the surface of the shower floor, while you should pour the vinegar over it. The mixture will help break down the plastic material and make it easier to remove. Then, you can scrub the surface with your brush and cloth, rinse the area with clean water, and pour some bleach into a cup.

Step 2: Scrub the floor with a brush and soapy water

If you have a plastic shower floor, it can be challenging to remove soap residue. The soap scum is hard to scrub off and can cause a slippery surface. To clean the floor, use a soft brush with dish soap and water in a bucket.

How to Clean Plastic Shower Floor

Do you have trouble cleaning your plastic shower floor? Well, scrub the floor with a soft brush and dish soap to remove the soap residue. You might also want to use Soap Scum Remover if you’re looking for something more permanent than just scrubbing away at it.

Step 3: Clean the shower walls

Cleaning the shower walls is an essential part of maintaining an attractive shower. You can do it with a cloth or a sponge, but it may be easier for those with hard-to-reach areas to use a squeegee or a clean, dry cloth.

When cleaning shower walls, the most important thing is to ensure you use the right tool. Some tools are better suited for cleaning glass, while others work better on plastic surfaces.

Clean the shower walls

Using a cloth to clean the shower walls is a great way to remove any dirt, soap scum, and mold from the walls.

Glass shower walls are more susceptible to damage because they can easily crack when they get wet. Ceramic tile shower walls are less likely to get damaged because they do not have glass.

The most popular material for shower floors is plastic because it is waterproof and easy to clean.

Step 4: Scrape and scour with a razor scraper

A razor scraper is a tool that you can use to clean the soap scum buildup from the shower floor. There are many ways in which you can use this tool. For example, you can use it to remove traces of soap scum or scrub away residual soap residue.

Scrape and scour with a razor scraper

A razor scraper is an effective tool for removing soap scum buildup on the shower floor. It is a long metal blade with a handle at one end and a curved or straight edge at the other. The blade has small teeth on its surface designed to scrape off the accumulated soap scum from surfaces such as tiles, walls, and showers.

The razor scraper’s long metal blade allows it to reach into tight areas where scrubbing brushes and sponges cannot go without damaging surfaces or scratching them up too much.

Step 5: Mask off the tiles and clean them with a scrubber

One of the most common cleaning mistakes is scrubbing tiles with a cloth instead of a scrubber. This causes the soap scum to build up on the tiles and can be difficult to remove.

Mask off the tiles and clean them with a scrubber

There are commercial soap scums removers that can help you get rid of these stubborn stains. These products break down the soap scum into smaller particles, easily removed with circular motions or a clean cloth.

The routine cleaning process should include using these products and a chemical cleaner and vinegar solution to eliminate any other stains on your shower floor.

Step 6: Mix bleach and water to clean the grout

Mix a cup of bleach with a gallon of water to clean the grout in your shower. To remove stains from plastic shower flooring, use a solution of one part bleach and nine parts waters.

Hot water is needed to help activate the chlorine in the bleach.

Mix bleach and water to clean the grout

Mix the bleach and water in a cup and pour it onto the grout. Make sure to use gloves when handling this mixture so that you do not get any bleach on your skin.

For stubborn stains, use hot water to loosen up the stains before adding more of the solution.

Step 7: Apply sealer to prevent discoloration of plastic

Sealers prevent plastic discoloration, which can be problematic when cleaning a plastic shower floor.

Sealing the surface of the plastic with a sealer will help prevent stains from seeping into the surface. The sealer is also helpful in preventing water stains and deep cleanings.

Apply sealer to prevent discoloration of plastic

The sealer is a challenging and durable material that you can apply to the surface of the plastic. It provides a barrier against water and stains, keeping them away. You can also use the sealer for deep cleanings on other surfaces, such as floors and walls.

Step 8: Dry everything up using an extendable hose

Extendable hoses are a great way to clean up and dry off your shower floor. They are a must-have for anyone with plastic shower flooring, which can be dangerous if it gets contaminated by water.

Dry everything up using an extendable hose

Extendable hoses are a standard tool in most households, but finding one that will fit your needs can take time and effort. This article covers the different types of extendable hoses available and how they can help you clean up or dry off your shower floor without using too much water.

Step 9: Throw out your shower curtain; it’s probably nasty anyway.

A plastic shower curtain is typically made from acrylic or PVC. Acrylic is softer than PVC and easier to clean, so it’s better for people with allergies or sensitive skin. It also dries faster than PVC, making it ideal for those with limited bathroom storage space.

Throw out your shower curtain; it's probably nasty anyway.

Many people need to learn how to properly care for their shower curtains because they need to know they should wash them at least once every six months.

Expert Opinion

This is an excellent article if you want to know more about the dangers of plastic shower floors, how they can become contaminated, and the best ways to avoid this from happening in your home.

There are various ways to clean your shower floor. You can use a vinegar and water mixture on the floor or a cleaner specifically designed for plastic.

Cleaning your shower floor is simple:

  • Pour a cup of vinegar.
  • Scrub it with a sponge.
  • Rinse it out with warm water and dry it.
  • Editors Team. (2022, February 17). How To Clean Textured Fiberglass or Plastic Shower Floor. Retrieved November 29, 2022. 
  • Anthony, A. (2019, September 7). How to Clean Shower Floors (Removing 5 Common Stains). Retrieved November 29, 2022.
  • Editors Team. (2021, August 5). How to Clean Plastic Shower Floor, Pans, and Doors. Retrieved November 29, 2022.
  • Channel. (2017, February 24). How To Clean Textured Fiberglass or Plastic Shower Floor – Baking Soda & White Vinegar. Retrieved November 29, 2022, from

Comments are closed.