How to Get Rid of Blue Toilet Water | Step by Step Guide

Disclaimer

Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

If you’ve ever had blue toilet water, then you know how annoying it can be. It’s the colour of the water in a toilet, and it’ll often show up on the floor and in the toilet seats. If this happens to you regularly, it might be time to get rid of it. Here are some tips on how to get rid of blue toilet water.

How to Get Rid of Blue Toilet Water

How to Get Rid of Blue Toilet Water

Start with this:

  • Get Sodium borate and vinegar
  • Put 1/4 cup of borax in the toilet bowl and stir with a toilet brush.
  • Allow roughly 20 minutes for 1 cup of vinegar to rest in the bowl.

Using a toilet brush, scrub the bowl to remove any leftover discolouration. Flush the toilet to clean it. How can I keep my toilet water from turning blue?

Preventing toilet water from turning blue can be a daunting endeavour due to the difficulty in curing the underlying reason. However, we can offer a few ways to eliminate the bluish ring from your toilet bowl.

Use water filters.

Although it is difficult to stop the oxidation process in old, rusty pipes, filters can help improve the condition of the water. Copper residue can be removed from the water before it leaves the toilet flush, preventing it from getting that unusual colour.

You can filter your water with different filters, such as activated carbon filters, chlorine filters, ion exchange filters, and fluoride filters. All of these filters can help you remove copper from your tap water, but they also protect you from other contaminants.

Alternatively, you can replace the plumbing in your home.

To prevent water discolouration permanently, you must address the underlying cause: corroded drain pipes. There is no way around this, as the current plumbing system must be replaced with plastic parts.

Keep in mind that replacing copper pipes is an expensive job. Our recommendation is to employ filters until you have developed specific strategies to secure your plumbing system.

How can Blue Copper Stains be removed from a Toilet?

How to Get Rid of Blue Toilet Water

In a bowl, combine 1 cup of distilled white vinegar and 1 cup of table salt.

  • Put on your toilet cleaning gloves.
  • In step 1, dip the sponge into the cleaning solution you prepared.
  • With the damp sponge, wipe off the copper stains.
  • Pull the chain and examine the surrounding area.
  • Vinegar will not affect your toilet’s tank, bowl, or internal components. Scrub the solution vigorously on your bathroom’s inside and outside surfaces to remove residue. 

Some other considerations

As long as your water supply retains a significant amount of copper, the blue ring will eventually reappear in the toilet bowl. Use the ammonia and water solution to remove the ring and any other blue stains every few months. This will prevent them from building up to the point where they become an eyesore or a real nuisance to clean.

Bottom line

Preventing blue toilet water can be a challenging task. There are, however, methods for removing the bluish ring from your toilet bowl. Filter your water using a variety of various filters or upgrade your plumbing to a new, leak-free toilet.

While it is difficult to halt the oxidation process in rusted pipes, filters can help improve the water’s condition. To permanently avoid water discolouration, you must address the root cause: rusted drain pipes.

Vinegar is a natural deodorizer and cleaning. To deodorize the toilet, add 3 cups of vinegar to the tank and let it sit for 30 minutes before flushing.

Comments are closed.