How to Lay Vinyl Tiles in a Bathroom Wall | Learn With Images
Unlike some other flooring materials, vinyl flooring requires only a flat subfloor. Ensure that you are working on a flat, level surface to prevent “slippage” or one-piece being higher than another. Generally, vinyl tiles can be installed directly over ceramic tiles if specific guidelines are followed. Let’s learn how to lay vinyl tiles in a bathroom wall.
Bathroom or shower room remodelling is one of the costliest and most time-consuming home improvement projects you will ever undertake. Due to the wide variety of materials on the market, there is room for experimentation. Because luxury vinyl planks are attractive and durable, you may wonder if they can be installed on bathroom or shower walls.
You can install a waterproof, scratch-resistant, and long-lasting vinyl plank on bathroom and shower walls. Cork underlayment protects against water, mildew, and mold damage in WPC and SPC vinyl planks. Consequently, they are suitable for use in bathrooms. So, let’s check how you can do this:
How many sheets Vinyl Flooring You’ll Need
Calculate the bathroom’s square footage in yards squared. Before calculating square yards, calculate square feet. Take precise measurements of the dimensions of the bathroom. For example, multiply the length by the width to calculate the area. Per square foot, a yard contains 9 square feet (9 square yards).
In this case, you would need 13 boxes if you see the equation above
A room that measures 12 feet by 8 feet has a total area of 96 square feet or 10.67 square yards.
How to Lay Vinyl Tiles in a Bathroom Wall
Follow these steps;
- Sketch a Floor Plan
- Prepare the Room
- Clean up the area before proceeding
- Prepare the Floors
- Clean up with a pair of gloves if you want
- Try using a PVA adhesive compound
- Use a leveller to make sure that everything fits
- Install the Underlayment
- Make sure everything fits.
- Calculate the missing spaces to fit the whole tile
- Remember to follow the manufacturer’s instructions
- Cut the Floor to Fit
- Remember to isolate well
- Lay Vinyl Flooring by Trimming in Place
- Cut your tiles using machines
- Use silicon to have a great insolation outcome.
- Match Patterns and Cut Tiles
- Remember to have your bathroom walls out of the dust
- Finish with a Tile Roller
Sketch a Floor Plan
On graph paper, draw a floor plan to scale. Don’t forget to take measurements beneath moveable appliances and in closets. If you intend to trim and fit instead of using a template, add 3 inches to the perimeter.
Prepare the Room
Before laying down the vinyl, you must complete some preparatory tasks in the room.
Clean up the area before proceeding
Remove all furniture, appliances, and other household items, as well as the toilet. Remove the doors and hinges from the door frame.
Clean up with a pair of gloves if you have. When combined with a trowel with a straight edge, the embosser creates a smooth surface to support the new flooring. Remember that you must eliminate damaged or detached vinyl flooring first.
Any floor made of wood or featuring an embossed or padded surface is required to have an underlayment. The new base will eventually reveal any imperfections in the old floor.
Prepare the Floors
The only requirement for installing sheet vinyl is a clean, smooth, and dry concrete surface. Fill in any gaps or fissures that may have developed.
Use a grinder to reduce the height of high spots. Use a masonry chisel and a small sledgehammer to remove any imperfections. Eye protection glasses may be helpful.
You can install sheet vinyl over an existing linoleum or floor in good condition. Utilize an embossing leveller if the old floor has a rough surface or indents.
You can try using a PVA adhesive compound.
Finally, the new floor or wall will take on the characteristics of the area beneath it. Use plywood underlayment if you cannot remove the old area is too rough for an embossing leveller.
Remember to use a leveller to make sure that everything fits
Unless the local building code specifies, 1/4-inch BC plywood is a suitable underlayment. Use underlayment-grade plywood if you intend to use it. This action will cause the floor to rise.
Cutting the bottom of the door frames and replacing the thresholds are necessary to accommodate the new thickness.
Install the Underlayment
Installing the underlayment is now possible. The new underlayment can slide under the door molding by slicing through the bottom moulding edges. You can determine the appropriate distance between tiles with the aid of underlayment.
Make sure everything fits.
Utilize ring-shank nails to secure any sagging, old floorboards. Fill any holes or cracks in the floor caused by the pins you just hammered in.
There should be a small gap between plywood panel seams to allow for expansion.
Calculate the missing spaces to fit the whole tile
Maintain a 1/8-inch space between the ceiling and wall as a standard measurement. Always use the fasteners and pattern recommended by the vinyl floor manufacturers and plywood.
Use a floor leveller or maybe a cement compound (patching) to fill the spaces between underlayment panels. After drying, sand it to a smooth finish. Completely decontaminate the flooring. There should be no splinters, lint, or wax on the surface. Use Adhesive products.
Remember to follow the manufacturer’s instructions
Always adhere to the instructions provided by the manufacturer. If not, the product warranty may be null and void.
Cut the Floor to Fit
Vinyl flooring is available in 6-foot and 12-foot widths, allowing for seamless installation in smaller rooms like bathrooms, hallways, and kitchens.
Before cutting, allow the new vinyl floor to acclimate to the room by leaving it in place for at least 24 hours.
There are two ways to measure and install vinyl. You can measure the entire floor and cut the vinyl to be 3 inches larger on all sides than the floor.
Then, position it and trim any excess material. This method is effective in small spaces with few angles or obstructions.
Alternately, you could create a floor plan template. Before applying, transfer the template to the vinyl and cut it out. Utilize this technique with thicker vinyl or in rooms with awkward angles or nooks.
Remember to have everything on the right level because that would isolate well.
- To create a precise pattern, you may wish to use a kit (install) containing paper.
- Next, grab a marking pen, take the tape and a cutting blade, and follow the detailed instructions.
Lay Vinyl Flooring by Trimming in Place
- First, trace your floor plan with a washable marker onto the vinyl sheet.
- Before cutting the vinyl, protect the subfloor. How do you do this? Place a piece of plywood (scrap) underneath it.
- Allow the vinyl’s edges to curl against the wall as you place it in the room. Allow 3 inches for trimming on each side.
- After making a vertical cut down the sheet, cut the vinyl to the floor’s level.
- Use a utility knife to create V-shaped cuts in the vinyl when it overlaps. Once you’ve reached the bottom of the vinyl, make several V-shaped cuts along the way.
- When the wall meets the floor, crease the vinyl by pressing a 2-by-4 against it. After making the crease, cut the flooring with a straight edge. Due to the expansion of the floor, leave a 1/8-inch gap between the new flooring and the wall.
You can cut your tiles using machines, too if you have them
It is possible to reattach shoe moulding and baseboards using the same technique. Raise them slightly off the ground to permit them to expand. Instead of installing flooring, you should install the moulding. Changes in humidity can cause the floor to adhere to tight moulding.
Use silicon to have a great insolation outcome.
When replacing an old floor, ensure that the new seam is at least 6 inches from the old seam.
You should apply adhesive to the wall when it is a difficult place to work
It can be applied to any hard, flat surface, including concrete, wood, and even another vinyl layer.
Match Patterns and Cut Tiles
Now, the remaining tiles can be utilized. The vinyl tiles’ edges must be flush with one another. Be mindful not to miss a repeating pattern in the tiles.
Remember to have your bathroom walls out of the dust
Make a cardboard template of the area, trace it onto the tile, and cut as necessary with a utility knife. Continue as expected after missing.
Finish with a Tile Roller
Upon completion, ensure that the tiles are firmly pressed into place. If you discover problem areas, roll them with a tile roller or pin.
Frequently Asked Questions
Can You Use Vinyl Planks on Shower Walls/Should You?
Consider installing vinyl planks as an alternative to tile on the walls of your shower. VLPs are unquestionably highly durable and waterproof.
Bathroom remodelers have long favoured ceramic tiles over vinyl planks due to their durability and low maintenance requirements. These tiles are difficult to install, expensive, and susceptible to grout damage despite their long lifespan.
After only a few months of use, grout can become mouldy or discoloured due to its porous composition and lack of waterproofing. It may also allow water to seep beneath the tiles, causing damage to the subfloor.
VLP, on the other hand, produces an entirely watertight panel when caulked. You can replace vinyl planks even after a few years without causing damage to the wall behind them.
Due to the high temperatures, you should not use vinyl planks and sheets in saunas or Turkish baths.
What are the advantages of Installing Vinyl Plank Flooring?
Vinyl plank flooring is a well-liked option due to its adaptability and resilience. It is comfortable underfoot and gives your space a sleek, refined appearance. Vinyl flooring is a popular option for families with children and pets due to its stain- and noise-resistant properties.
Vinyl plank flooring is popular in bathrooms and basements for the same reasons. In contrast, you can install vinyl plank flooring in the kitchen or the bathroom.