How to Remove a Jacuzzi Tub | 17 DIY Steps with Images

The Jacuzzi tub is a luxurious feature in many bathrooms, but it can also be a hassle to remove if you decide to remodel or move. Whether you want to replace a Jacuzzi tub with a smaller shower or completely remove it from your bathroom, it is labor-intensive and complex. Knowing how to remove a Jacuzzi tub properly is essential for avoiding potential damage to your bathroom and the tub itself:

• Gather the necessary tools and materials.
• Turn off the water and unplug the Jacuzzi tub
• Drain the water from the tub
• Disconnect the drain pipe
• Disconnect the water supply lines
• Disconnect the overflow tube
• Disconnect the Jacuzzi motor
• Remove the jets and other accessories
• Remove the tub skirt
• Removing the Tub Itself
• Cut access into the wall behind the tub
• Disconnect the tub from the wall studs
• Lift the tub from the wall
• Remove the tub from the space
• Dispose of the tub properly
• Clean the area where the Jacuzzi tub was installed
• Inspect the area and make any necessary repairs

Let’s discuss the step-by-step process for safely and successfully removing a Jacuzzi tub from your home. 

We will explain the necessary tools and supplies, how to prepare the room and the removal process. 

How To Remove a Jacuzzi Tub

1. Gather the necessary tools and materials

Before removing your Jacuzzi tub, review the safety guidelines and ensure you have all the necessary tools and materials. 

For this project, you will need a reciprocating saw, a pry bar, a hammer, a utility knife, a screwdriver, and a putty knife. 

Additionally, you will need protective eyewear, gloves, and an apron. Safety is always the number one priority!

2. Turn off the water and unplug the Jacuzzi tub

After safely draining the Jacuzzi tub of all its water, the next step is to turn off the water supply and unplug it from the electrical socket. 

It is important to ensure that the Jacuzzi tub is no longer in the water supply or electrical socket to avoid the risk of injury or damage to the Jacuzzi tub. 

Once the Jacuzzi tub is disconnected from the water supply and the electrical socket, the Jacuzzi tub can safely remove.

3. Drain the water from the tub

The last step in removing a Jacuzzi tub is to drain all of the water from the tub. Disconnect the hose from the drain and open the drain plug to allow water flow. If necessary, use a pump to expedite the process. 

Once the water goes off from the tub, you can securely reseal the drain plug. Seal the plug tightly to prevent further water from entering the tub.

4. Disconnect the drain pipe

After you have shut off the power, it’s time to disconnect the drain pipe from the Jacuzzi tub. It requires a wrench and a pair of pliers. Loosen the nut that connects the drain pipe to the tub. 

Hold onto the pipe with your pliers while you unscrew the nut with your wrench. Once you remove the nut, you can pull the drain pipe away and set it aside.

5. Disconnect the water supply lines

Before you start removing the Jacuzzi tub, it is important to disconnect the water supply lines. Turn off the main water supply and the shut-off valves near the tub to the “Off” position. 

Open the drain plug to drain the remaining water from the tub. Once the tub is empty, disconnect the lines from the shut-off valve and the water supply lines from the tub. 

You may need to use a wrench to loosen the nut on the shut-off valve.

6. Disconnect the overflow tube

Carefully loosen and remove the overflow tube. Check for any water remaining in the tube and drain any excess water. 

Clean the tube thoroughly with a damp cloth, then set it aside for re-installation.

7. Disconnect the Jacuzzi motor

When you have decided to remove your Jacuzzi tub, the next step is to disconnect the Jacuzzi motor. 

The Jacuzzi motor is a complicated mechanism that must disconnect cautiously and carefully. Unplug the power cord before beginning to work on the motor, and turn off the circuit breaker. 

Then, disconnect the pipes leading to the motor, and unscrew the mounting bolts to remove the motor. Finally, remove the motor by lifting it off the frame, and handle it carefully.

8. Remove the jets and other accessories

After disconnecting the jets and other accessories:

• Use a flat pry bar to remove the tub’s trim. You may need to partially disassemble the tub if you cannot access the trim.
• Carefully pop the trim off using a flat pry bar.
• Wear safety glasses and gloves when popping off the trim. After removing the trim, you can access the jets and other accessories.
• Remove the jets, pumps, and other accessories as necessary.

9. Remove the tub skirt

The tub skirt is the decorative panel that rests behind the tub and hides the jets and other tub components. To remove the skirt, locate the screws that secure it to the tub frame. 

Once you remove the screws, carefully lift the skirt off the tub and set it aside. Keep any screws you have removed and store them in a safe place. Once you remove the skirt, the tub is ready to leave the house.

10. Removing the Tub Itself

The tenth step in removing a Jacuzzi tub is to remove the tub itself. It is typically done using a crowbar to pry the tub off the floor. Depending on the model and installation, the tub may need to be cut into smaller pieces to remove safely. 

It is important to follow the appropriate safety procedures during this process and to wear protective equipment such as gloves, coveralls, and safety glasses. Once the tub is removed, the space can fill with new flooring if desired.

11. Cut access into the wall behind the tub

Removing a Jacuzzi tub requires cutting access into the wall behind the tub. Before beginning, it is important to ensure the wall is structurally sound and the area is clear. 

Careful measurements should take to ensure the access point is correctly sized and placed. A professional with the right tools should employ to cut the access point into the wall with precision. 

During the process, the wall should reinforce to ensure proper support and no other damage to the surrounding area. 

After the access point does cut, the Jacuzzi tub can be removed and disposed of.

12. Disconnect the tub from the wall studs

Remove a Jacuzzi tub; the first step is to disconnect the tub from the wall studs. It is a relatively simple process but should do with extreme caution due to the potential for damage to the studs and other surrounding components:

• Turn off the power to the tub, then disconnect the electrical connections on the side of the tub.
• Using a wrench, disconnect the water lines from the tub.
• Remove any screws or nails connecting the tub to the wall studs, and carefully slide the tub out of the frame.

With these steps complete, the Jacuzzi tub is ready for removal.

13. Lift the tub from the wall

Removing a Jacuzzi tub from the wall is a multi-step procedure. First, turn off the power to the Jacuzzi tub and disconnect the power source. 

Next, disconnect the drain line and then the supply lines. It is important to have the proper tools to complete this task, such as pliers and adjustable wrenches. Once you disconnect all lines, it is time to lift the Jacuzzi tub from the wall. 

It should do with extreme caution as the tub may be heavy and awkwardly shaped. When disposing of the tub, it should take to a specialized disposal center to ensure it is ready and safe, as the tub may contain hazardous materials. 

Taking the proper steps to remove a Jacuzzi tub from the wall is an important safety precaution.

14. Remove the tub from the space

Removing a Jacuzzi tub from space is not simple, but it is possible with the right tools and knowledge. 

First, you should turn off the power to the motor and disconnect the motor from the tub. Next, drain the tub by disconnecting the drain line or using a submersible pump. 

Once the tub is drained, you can begin taking apart the frame. It requires carefully cutting through the tub frame and removing the screws holding it in place. 

It would help if you removed the access panels and other components, such as the control panel. 

Finally, you can lift the tub and frame out of the space. With the right tools and knowledge, you can successfully remove a Jacuzzi tub from any space.

15. Dispose of the tub properly

Properly disposing of a Jacuzzi tub is essential to ensure people’s and the environment’s safety. 

First and foremost, all electrical wiring must disconnect, and any existing plumbing should be capped off. 

After disconnecting any remaining parts, the Jacuzzi tub should be broken down into smaller, manageable pieces. Personal protection equipment, such as gloves and safety goggles, should be worn during the process to prevent any accidental injuries. Larger pieces can then take to a dump or disposal site. 

Finally, any hazardous materials, such as lubricants, adhesives, and sealants, should be disposed of by local regulations. 

By following this procedure, you can ensure that the Jacuzzi tub is safely and properly removed.

16. Clean the area where the Jacuzzi tub was installed

Before removing the Jacuzzi tub, it’s essential to thoroughly clean the area where it does install. 

Start by removing visible debris, such as dirt and grime, and thoroughly vacuuming the area. 

If there are any screws or bolts, unscrew them and set them aside. Using an all-purpose cleaner and a brush, scrub the installation area, paying close attention to gaps and crevices. 

Once complete, use a damp cloth to remove any remaining residue and debris. 

Once the area is clean, you can begin removing the Jacuzzi tub.

17. Inspect the area and make any necessary repairs

Inspecting the area to remove a Jacuzzi tub is an important process. It is important to ensure that the space is large enough to safely and effectively remove the tub and to check the area for any damage or hazards that may have to address before the tub can remove. 

Furthermore, any necessary repairs or modifications to the surrounding area should make to ensure that the tub is removed safely and efficiently. 

It is also important to check the piping, wiring, and other components that may connect to the Jacuzzi tub to ensure no safety risks are associated with the removal. 

Once the area inspects and necessary repairs and modifications have been made, the Jacuzzi tub can safely and efficiently remove.

Expert Opinion

You can accomplish this relatively easily with the right tools and knowledge. It’s important to take safety precautions when dealing with any plumbing project and to check local laws before beginning. 

With the right preparation and steps, you can successfully remove your Jacuzzi tub and make room for new fixtures.

It would help if you took the necessary safety precautions, such as wearing protective clothing and goggles, turning off the power, and disconnecting the plumbing. 

Additionally, you may need to rent special tools and enlist the help of a professional to ensure the job is done correctly. You can successfully remove your Jacuzzi tub with the right tools and safety measures.