How to Stop Toilet Water from Splashing | Perfect Solution


Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

Toilet water is a common pollutant. It can splash onto your hands, feet, and clothes when using the toilet. And it can also cause environmental problems. The water in toilets consists of many different chemicals, including pesticides and heavy metals. This can damage the environment and the environment’s ability to support life. Toilet water can also contain bacteria that can cause food poisoning, respiratory problems, and even death. Let’s learn how to stop toilet water from splashing.

How to Stop Toilet Water from Splashing

How to Stop Toilet Water from Splashing

Place a piece of toilet paper about 12 inches long in the bowl to minimize noise and splashing on landing. Start with a flush. Add a little detergent about halfway through. This is a serious problem that almost everyone has encountered, but few talk about: fecal splashing.

Place a piece of toilet paper on the surface of the water. This will slow down the droppings and force them across the water surface at a sharper angle, thus eradicating the poop splashing problem for good.

Use the (largely) empty toilet bowl to relieve yourself.

Using the dispensing valve

Assuming the water supply valve is available, and the toilet is a siphon type (with a reservoir at the back), try the following:

Cut off the water supply.

Press and hold the flush lever while keeping an eye on the bowl; as soon as you see the siphon activate (water starts to come out quickly), release the lever. The siphon will draw most of the water out, and, if done correctly, no new water will come in from the cistern to replace it (although if done incorrectly, the level will be lower than before). Also, the rim jets will turn off, reducing the water level in the bowl.

Turn the supply back on: you will hear the cistern filling at the rear.

Once the water has stopped flowing, flush (there may not be enough water to empty the bowl).

The rim jets work as follows:

When the supply line enters the cistern, it splits in two directions: one outlet is used to refill the cistern (the fill valve), and the refill pipe is sent to the overflow pipe to provide water to the rim jets in the bowl (fountain). By shutting off the waterline, water is prevented from reaching the rim jets, thus reducing the amount of water entering the cistern during a flush.

With the help of a bucket of water

This is impractical because you are unlikely to have a bucket with you. Even if you did, filling and dragging a bucket can be impractical, but it works, also, in any toilet.

  • Fill a bucket halfway with water, about three to four liters.
  • Quickly pour it into the bowl.
  • The siphon will activate, emptying the bowl.

How to Urinate without Splashing

How to Stop Toilet Water from Splashing

The two main parameters that contribute to urine splashing are the height of the toilet bowl or urinal and the “angle of attack.” The most effective method to minimize splashing is to angle the urine stream to hit the toilet or urinal wall gradually.

So, the closer the tip is to 90 degrees, the stronger the splash. Another simple technique is to sit down. When you stand up, your urine travels five times farther, gaining a lot of speed along the way and generating a lot more splash. Sitting also means a more restricted angle of attack.

Also, avoid urinating directly into the water and place a piece of toilet paper to absorb the impact before you start. Urinating into a body of water creates a cavity that collapses in on it, causing a tremendous rebound. In addition, physicists point out those different materials, baffles, and other obstructions (urine cakes) can make a significant difference. Porcelain, for example, is hydrophilic and forms puddles that create splashes when more urine is added. Hydrophobic surfaces, such as those on your car windshield or smartphone screen, would significantly reduce splashing.

Bottom line

Reduce the speed of droppings and drive them across the water surface at a steeper angle using paper, detergent, or rim jets. Disconnect the water supply and flush the toilet if your toilet is a siphon-type cistern. 

The rise at which your urine strikes the toilet or urinal causes water splashing. The bowl’s height and the angle of attack are two critical characteristics that affect splashing—urinating into a body of water results in the formation of a cavity that collapses in on itself, resulting in a rebound.

Comments are closed.