Articles, products, and services offered on this site are for informational purposes only. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.
Please review our disclaimer before acting based on anything you read or see.
Are you on the lookout for the best home security camera? Well, you have to opt for the Arlo security camera because it is recommended by experts who have not only tested it but also used it in their homes. Once you install it, it will start working well, and you will be able to watch all the recordings and live videos. While installing it, you may encounter several problems with its base station as it is difficult to understand these technical terms. You need to know the specifications and the complete procedure for its installation. If your Arlo base station stops working, you should read the attached guide on “how to reset Arlo base station.”
The NETGEAR Arlo Base Station is primarily used to connect Arlo wireless cameras to the Internet via a router. A basic wifi network connects your Arlo and Arlo Pro wireless cameras to the Arlo base station.
It also enjoys long-range connectivity at the same time with powerful battery life. However, occasionally, an Arlo user may have a problem offline with an Arlo base station. This will prevent the user from playing or recording the recording because the camera will not work properly.
The first step in solving the problem is to switch the Arlo base station to online mode from offline mode. It is further used to improve range and for long battery life. Its functionality is supported by a USB backup, 7 days of free cloud recording, and a smart siren.
Read its features and find out how it will improve security with great ease.
Follow the procedure to reset the Arlo base station
Resetting the Arlo base station will return to the default settings. The serial number is removed from your Arlo account. Follow the procedure below and apply the following: –
To reset to factory settings on a base station or SmartHub:
Follow the steps below to add and configure your base station or SmartHub.
If you do a factory data reset, your base station’s values will be reset to their default settings. It also deletes your Arlo account’s serial number.
To restore the factory settings on the base station, follow these steps:
If your Arlo cameras are synchronized with the base station, you may need to synchronize cameras back on the base station.
Before we recognize the steps to solve a problem, we need to know the reason for the problem. There are many possible reasons for offline problems with the Arlo base station. Below are some of the important causes of offline problems.
The Arlo base station must be configured correctly. If you miss the point during setup, chances are you have a problem with your Arlo database offline.
Sometimes there may be a weak or weak internet connection. Therefore, your Arlo base station may not be able to connect due to a weak or poor internet connection. So, try to contact your ISP.
Check if your router firmware is up to date or not. If it is not updated, update it and reconnect to the Arlo camera.
Before you begin troubleshooting, check the device lights on the front of the system to ensure your system is online or offline. There is an LED difference between the old Arlo camera and the new Arlo camera because the new Arlo camera has one LED, while the old Arlo base stations have three or five LEDs.
Resetting to factory settings will reset your Arlo base station or SmartHub to the default settings. With all linked devices and cameras, the base station is removed from your Arlo account when you restore factory settings. After resetting to factory settings, you must complete the setup again.
If there are metal items or thick walls and ceilings between the camera and the base station, the camera may turn off. Do you have an access point or other wifi device near the SmartHub or base station? If so, your Arlo system may have wifi congestion.
A flashing yellow LED on the SmartHub indicates that the camera is out of range. This may be due to range or a weak signal due to interference. If your cameras are working, this may not be a problem, but it may cause the cameras to not stream.
Restoring Your Arlo Wireless Camera to Factory Defaults returns the settings to their default values and removes the camera from your account. This means you have to go through setting up the Arlo app to use your camera after resetting to factory settings.
The Arlo app is available at Google Play and Apple app stores.
Make sure your router is turned on. If the Internet light on your base station is amber that means it’s connected to your network but not to the Arlo cloud server. Lift the base station’s Internet LED is green, reset it to factory settings, and start the setup process over.
A flashing blue light on the camera usually indicates attempting to synchronize with the base station. If it is flashing slowly, a fast flashing blue light means it has synchronized. It should turn off after a few seconds after syncing.
If you need help from an Arlo manager, contact the Arlo support team and get an immediate response from the most experienced Arlo technicians.
The marble mosaic title increases the beauty of the exterior. But times come when we…
We all face a time in which we need to change the ceiling or remove…
The most important part of the plumbing system is the ventilation of the basement toilet.…
If you have to unlock the commercial door handle but little bit confused. So yes…
If you have 3 pendant lights but you both have 3 switches then no worries.…
Harbor breeze fans are programmed with a remote. Which makes it more reliable and convenient.…