Articles, products, and services offered on this site are for informational purposes only. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.
Please review our disclaimer before acting based on anything you read or see.
Installation of security cameras as a DIY project is complex if you don’t have the proper knowledge. In addition, the effectiveness of the wiring technique determines the surveillance quality, and searching for the appropriate approach online is super complicated also. There are five types of cables used in security cameras, and you can’t find explicit instructions for these on the internet. If you want to know about the connections and procedures, we are here to guide you. We don’t confuse yellow, red, and black wires because we will cover all about security camera wiring color code in this article in detail.
You might be confused by the number of tools required for setting the hard-wired surveillance systems of security cameras. The same tools which you need are as follows:
Whether it is Siamese or Ethernet cable, you will need a tool to strip back the cable jacket to expose the inner conductors. Again, different strippers should be used for both of them.
It would be best if you used a modular crimping tool for the termination of the Ethernet cable. If you are setting an IP security camera system, you should use a cat5e Ethernet cable to send power and data to your IP security camera.
Learn More: How To Block Neighbor’s Security Camera
If you want to have something smaller in your toolbox, you can opt for this handy stripper. It is available in the market for 10$ and has a diameter of .18 inches to .25 inches with no adjustment required.
You have to switch from one cable to another dimension, and it is designed for Ethernet cables.
[amazon box=” B07MQB7STL”]
If you are dealing with the analog CCTV system, it is better to use Siamese cables. This stripper is not like the Ethernet cable, as it has two levels a wider diameter is used to strip back the outer cable jack and a narrow diameter to strip the inner insulator.
It has a textured braid comb which is used to pull out the outer copper braid. The Ethernet cables need different types of cable strippers; the one especially is designed for the diameter of the coax cable.
[amazon box=” B007ZXAM62″]
A preset coax stripper is used for setting the specific size, as these tools are faster and easy to use. This stripper is less flexible and is used for only one cable size. It is simple, trustable, adjustable, and be bought for $10. This instrument will be a great addition to your toolbox if you deal with the RG-59 coax cable.
[amazon box=” B01MA6491K”]
It is not quick to use as a preset stripper and works well if you work with different coaxial cables. Unfortunately, the lines available for this stripper are too big to use.
[amazon box=” B074V13V36″]
If you are working with Ethernet cables and Siamese cables, it is better to use a multi-stripper for cable stripping. This tool is best for telephone /audio cable, coaxial cable, Ethernet cable. The Ethernet stripper tool is adjustable so that you can use it for different sizes of wires. On the other hand, the coaxial cable strippers are readjusted, but they can still handle RG 59, RG6/RG 6 Quad, and RG 7/11 cable sizes.
[amazon box=” B00846HLJU”]
When you have stripped the cables, it’s time to add connectors; you need specific tools. You have to use RJ45 connectors for the Ethernet cables, and for Siamese wires, you will use BNC connectors.
Both types of connectors are the same in look, but there are some differences based on the function they perform.
The crimp tools are used to connect both RJ 45 and BNC connectors. They both work in the same way by crimping and crushing the sides of connectors in the cables.
[amazon box=” B07GFXHH91″]
This tool is also called modular crimp tool and is used to connect eight conductors, passing through the conductor into the cable jacket.
[amazon box=” B09276X12V”]
BNC tools connect the ends of the Siamese cables and do not need the best installation for any specific system.
[amazon box=” B083LYKTWC”]
The meaning of the color of the cable used in Ethernet cable is different for its other uses. It depends on where and why for the intended environment. For instance, the government uses different colors for Ethernet cables regarding functions they perform, e.g., yellow for top-secret, red for medium, and blue for unclassified data.
Grey Ethernet | Grey Ethernet cables represent the standard Ethernet connection and are used for residential and commercial purposes. |
Green Ethernet | Green cables are best to use to classify crossover connections and connect different devices and computers. |
Yellow Ethernet | Yellow Ethernet cables can be used to power over the internet and deliver a 30 W current when used in Ethernet twisted cable. |
Blue Ethernet | Blue Ethernet function for the terminal server connections. A terminal server works for the links of multipurpose systems without modems and other network interfaces. |
The security cameras use cables to transfer data to a central hub; it uses extra wires of different colors to serve this purpose. These wires have other functions to perform, and based upon their positions, and you have to connect them correctly. The security camera wiring color code are also important to understand.
Color codes
There are five colored wires in security cameras, and one is yellow two reds and two blacks. In some rare cases, you can find the white color too.
Yellow wire
The yellow wire in the security camera is related to video data transferring and is known for positive wire. However, the yellow wire inside the black is 99.9% coaxial.
Red wire
These are two wires and are electrical wires, and are made for DC 12 volt positive current, and are called positive cables.
Black wire
The black wires are the negative wires used to transmit video, and the other is for the power supply.
Wiring RJ 45 and Ethernet cables
To splice the wires, remove the outer insulation to free inches of the wire at the end of each cable. It is an excellent practice to slide a piece of heat shrink tubing at the end of one wire before you start, so when you are finished, you can shrink it to protect and immobilize the splice.
When it comes to hooking up your security camera, you must transmit video through some cable. You can use RG59 cable, RCA plug and play cable, and CAT5 cable in the CCTV industry. These are the three types of CCTV cables.
The protective ground is green or green with a yellow stripe. The neutral is white; the hot single phase wires are black and red in the case of a second act. Three-phase lines are red, black, and blue.
Once anyone gets hold of the three color codes, it will be easy to connect them correctly. However, you should be careful while wiring the camera, and if you get confused for any reason, get help from the expert because minor mistakes can damage your system. Therefore, it is necessary to have the right tools and experienced person to do the job. Hope you have learned about the security camera wiring color code.
The marble mosaic title increases the beauty of the exterior. But times come when we…
We all face a time in which we need to change the ceiling or remove…
The most important part of the plumbing system is the ventilation of the basement toilet.…
If you have to unlock the commercial door handle but little bit confused. So yes…
If you have 3 pendant lights but you both have 3 switches then no worries.…
Harbor breeze fans are programmed with a remote. Which makes it more reliable and convenient.…