How to Clean Grout between Marble Tiles | DIY Cleaning Guide
Disclaimer
Articles, products, and services offered on this site are for informational purposes only. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.
Marble and grout are very easy materials to maintain when a proper cleaning routine is applied. It is very important to obtain components that clean effectively but are gentle enough not to damage either surface. That’s why today we bring you how to clean grout between marble tiles. Even after cleaning, tile floors with dirty grout still look dirty.
Fortunately, you can easily clean the grout with simple household products to make your tile look new again.
Mix 4 parts baking soda with 2-part water to make a thick paste.
These acidic cleaners work with all grout colors. However, Vinegar is harmful to some natural stones such as marble.
With your finger, apply the paste to the grout stripes.
Although baking soda is not harmful, wearing rubber gloves can help prevent scratches or irritated skin from abrasive grout and baking soda.
Apply a vinegar solution to the baking soda grout
Pour equal parts water and white vinegar into a squeeze bottle after preparing the mixture.
Spray baking soda into the vinegar solution after that. As soon as the natural cleaning process begins, you should hear a bubbling sound and observe bubbles.
It is not advised to use vinegar if your stone tile is natural.
Whenever bubbles appear, the chemical interaction between the vinegar and baking soda has already begun.
Typically, the response lasts a few minutes. After the bubbling stops, the chemical cleaning process begins.
Scrub grout lines with a brush
Use a nylon bristle scrub brush or scrub brush along the grout lines.
Pay attention to the corners and edges and clean those areas as well.
Mop the floor with water
Use a mop and water to remove the baking soda and vinegar residue.
Rinse your mop and change the water frequently during the cleaning process so you don’t continue to spread the residue on the floor.
Before cleaning the floor, test a hidden part of the grout.
Some floor tile or grout may bleach or discolor with oxygen bleaching.
To test the grout’s colorfastness, apply a small amount of the oxygen bleach solution to an inconspicuous section of the grout.
Pour the oxygen bleach solution over the grout. Be sure to pour enough to cover the grout lines completely. To avoid having a completely wet floor, you need to clean one section of the floor at a time.
Be sure to pour enough to cover the grout lines completely.
To avoid having a completely wet floor, it is necessary to clean a part of the floor.
For scrubbing, bleach mixture into grout lines uses a nylon bristle brush.
For optimal results, it is necessary to allow the oxygen bleach solution to settle in.
Pass the brush back and forth in the grout.
Don’t forget to scrub the corners and around the edges of the floor, as dirt and grime tend to accumulate here.
Dip the brush in oxygenated bleaching powder to increase the cleaning power.
If you find a darker or more noticeable stain, you can prepare a stronger oxygen bleach solution by dipping your wet brush directly into the oxygen bleach powder.
To prevent water from mixing with your main container of oxygen bleach powder, pour a small amount of powder into a separate container.
Apply the paste to the grout around the edges and between all the tiles to get a uniform and clean appearance.
Allow the mixture to settle for 15 minutes.
You may see a bubbling reaction when the baking soda and hydrogen peroxide interacts. Give the paste time to work into the grout to remove stains on the marble completely.
To remove all solutions, rinse the grout with warm or hot water.
To rinse the grout solution, pour a small amount of water directly onto the tile floor.
Be careful as wet tile floors can be very slippery.
Use a rag to wipe off the grout and remove any remaining residue or dirt.
Wipe the remaining grout paste by gently rubbing the floor with a cloth.
This can be done by dragging the fabric on the floor with both feet.
Mop the floor with clean water
Ensure there is no soap or residue by thoroughly mopping the floor with a cotton mop or sponge.
For a clean finish, change the water frequently and rinse the mop.
Another simpler option is to use grout and tile cleaner.
Method 4: Cleaning grout with a steam cleaner
Rent or purchase a steam cleaner
Steam cleaners can effectively clean and disinfect all tile and grout types, as they contain no chemicals.
To find a machine for rent or sale, please visit your local store.
Make sure the steam cleaner you purchase has the proper accessories for cleaning grout:
Steam hose
Small brush attachment
Follow the manufacturer’s instructions for assembling and filling the steam cleaner.
To avoid causing damage to the equipment, it is necessary to read the instructions carefully.
Fill the tank with clean water up to the fill line according to the instructions in the manual.
Do not add soaps or chemicals to the water tank of the steam cleaner.
The steam cleaner’s instruction manual will tell you how long to wait after turning on the machine before cleaning.
Move the brush over the grout.
May start on one side of the room and move toward the other end of the room.
The steam will lift dirt and grime from the grout and kill any mold and mildew present.
Use a mop for scrubbing excess moisture after cleaning.
Steam cleanings will remove all grout sealers, so only use a steam cleaner if your grout is not sealed or if the sealer is old and you are ready to remove it.
For many, the solution is steam-clean marble grout. However, not everyone has these devices that make your life simpler. Products around marble are usually very good for stains.
How to Clean Grout between Marble Tiles: FAQs
What cleans the grout between tiles?
Scrub the dirty grout with warm water and a stiff bristle brush.
Spray with equal parts of warm water and Vinegar for a few minutes.
Apply a paste of baking soda and spray with Vinegar.
Pour a little hydrogen peroxide.
Apply Oxygen bleach for 10 minutes.
Try a commercial product.
What is the best way to keep marble pieces clean?
Start by regularly sweeping marble floors to keep dust and dirt away.
Use a soft broom to sweep up dirt and dust particles. Mop or wipe with mild cleaning agents such as baking soda or non-phosphate detergents.
Rinse using a clean, damp soft cloth, then wipe dry.
What kind of grout do you use for Penny tiles?
Unsanded grout is more of a fine powder and is best used in 1/16 inch spaces. Because of the pennies’ shape and location in the penny sheets, the smallest space where the pennies are closest together is about 1/16 inch, BUT the rest of the spaces between the pennies are larger, hence the need for sanded grout.
The grouts of natural stone tiles are a little delicate. If you do not know how to apply the products, it is possible to ruin your tile. Your floors can be well cared for if you do your routine maintenance at the right times.
You must leave it in specialists’ hands if you are not trained for this work.
Theresa Coleman Clement
Theresa Coleman Clement is a seasoned content writer who effortlessly marries creativity with functionality in her insightful articles about home improvement and decor. Theresa's work has become a staple for homeowners seeking to enhance their living spaces, covering an expansive range of topics, from interiors and decorations to home plans. Her knack for design, coupled with practical advice, helps readers breathe new life into their homes, balancing aesthetic appeal with practicality. Theresa's visionary approach turns every house into a home, embodying the belief that comfort, style, and functionality coexist harmoniously.