How to Hide Split Ac Pipe | 10 Steps You Should Apply Now!

Disclaimer

Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

Are you thinking about how to hide split ac pipe? Good air conditioning is essential to any home, and split air conditioning systems are now the most popular type of AC. 

The unsightly plastic lines that link the indoor and outdoor portions of the AC unit are not only an eyesore, but they can also affect the overall look and feel of your home. 

You can effectively conceal the pipe and other air conditioning components using PVC pipes, flexible covers, and wall covers.

This Home Affluence post will explore some simple and effective ways to hide your split AC pipe and make your home look tidy. 

From creative solutions like painting and camouflaging the pipe to low-cost solutions like buying a specially-designed cover, various options are available to help you hide your split AC pipe.

How to Hide Split Ac Pipe

Follow the below steps

  • Take measurements
  • Cut a PVC pipe of the required length and diameter.
  • Join the two halves of the PVC pipe with Teflon Tape.
  • Connect the condenser to one end of the pipe using flexible copper tubing
  • Connect the evaporator to the other end of the pipe using flexible copper tubing.
  • Fix a sheet of Drona foam on top of the copper tubing.
  • Place a second sheet of Drona foam on top, and cut it to size.
  • Cut a hole in the exhaust vent and fix it in place.
  • Cut a hole in the supply vent and fix it in place.
  • Putty and paint any rough edges.

Now, let’s elaborate on the steps in detail;

Step 1: Take measurements

Step 1 in hiding a split AC pipe is to take measurements. Before you can begin working on the project, you need to know the exact size and length of the pipe you’re working with. 

Measure the pipe’s circumference from the base of the AC unit to the hole in the wall.

It does help you know how much material you need to cover the pipe. 

How to Hide Split Ac Pipe

It is also essential to measure the length of the pipe and the distance from the AC unit to the wall to determine the best way to hide the line.

Step 2: Cut a PVC pipe of the required length and diameter.

After you’ve gathered all the necessary materials, it’s time to start the job! Step 2 is to cut a PVC pipe of the required length and diameter. 

Measure the distance you need and mark it on the PVC pipe, then use a sharp saw to cut the pipe. Ensure the tube is straight and smooth, with no jagged or uneven edges.

How to Hide Split Ac Pipe

If necessary, you can use sandpaper or a file to smooth out any rough spots. Once the pipe does cut, you can move on to the next step!

Step 3: Join the two halves of the PVC pipe with Teflon Tape.

Now that both ends of the PVC pipe are cut, the next step is to join the two halves together.

How to Hide Split Ac Pipe

To do this:

  • Start by wrapping Teflon tape around the threaded portion of the pipe.
  • Wrap the tape clockwise and wrap it around two or three times.
  • Once the Teflon tape is in place, twist the two halves of the pipe together in a clockwise direction.
  • Tightly twist the two halves together to ensure a good seal. Once the two halves join, you can move on to the next step.

Step 4: Connect the condenser to one end of the pipe using flexible copper tubing

Step 4 is the last in hiding your split AC pipe. To begin, make sure you have the right tools for the job.

Connect the condenser to one end of the pipe using flexible copper tubing

It includes flexible copper tubing, a copper tube cutter, and copper connectors. Begin by cutting the copper tubing to the exact length required to connect the condenser to one end of the pipe. 

Use a tube cutter to get a clean and precise cut. Secure the copper tubing to the condenser and pipe with the copper connectors, and then you’re all set. 

Step 5: Connect the evaporator to the other end of the pipe using flexible copper tubing.

Step 5 is the final step in the installation process. To complete it, you’ll need to connect the evaporator to the other end of the pipe using flexible copper tubing. 

Connect the evaporator to the other end of the pipe using flexible copper tubing.

Ensure that the tubing is long enough to reach the other end of the pipe and route properly to avoid kinks or sharp turns. Once everything is connected, the system is ready to be tested.

Step 6: Fix a sheet of Drona foam on the copper tubing.

Using Drona foam to insulate the copper tubing is an effective way to increase energy efficiency. First, make sure the copper tubing does cut to the desired length. 

Next, lay out the sheet of Drona foam on a flat surface and cut it to size so it will fit snugly over the tubing. 

Fix a sheet of Drona foam on the copper tubing.

Cut small holes in the Drona foam and insert the tubing, securing it with adhesive. Lastly, use a heat gun to attach the insulation to the tubing and create a seal.

It does ensure the insulation is secured correctly and protects the copper tubing from any moisture or extreme temperatures.

Step 7: Place a second sheet of Drona foam on top, and cut it to size.

When placing a second sheet of Drona foam on top, it is crucial to ensure that it does cut to size. 

It does ensure that the foam is the correct shape and size to fit the desired area. 

It does recommend using a sharp knife to cut the foam and to make multiple passes to avoid tearing or distortion.

Place a second sheet of Drona foam on top, and cut it to size.

Cutting the foam to size will help to ensure that it fits snugly against the walls and adheres properly. 

Additionally, it is vital to ensure that the edges are even and flush with the surface to provide a clean, professional finish. 

With the right tools and techniques, it is easy to cut the foam to the desired size and shape.

Step 8: Cut a hole for the exhaust vent and fix it in place.

Step 8 requires cutting a hole in the exhaust vent and fixing it in place.

The vent should be cut to the exact size of the exhaust fan and placed strategically for maximum efficiency. Before securing it, seal the hole’s edges with caulk or putty to ensure a tight fit.

Cut a hole for the exhaust vent and fix it in place

If necessary, use a hole saw attachment to ensure a perfect cut. Once in place, secure the exhaust vent with screws or other mounting hardware, such as clamps, to provide a secure fit to the wall.

Finally, take the time to connect the vent to the fan using a flexible duct to finish the installation.

Following these steps will ensure the exhaust vent’s secure and efficient installation.

Step 9: Cut a hole for the supply vent and fix it in place.

The ninth step in installing a new dryer is to cut a hole in the supply vent and fix it.

It’s important to measure precisely to ensure the hole is the correct size for the vent, as an incorrect fit may reduce the dryer’s air circulation and energy efficiency. Once the proper size is determined, should cut the hole and secure it firmly with screws or a mounting bracket. 

Cut a hole for the supply vent and fix it in place.

Ideally, the vent should be directed to the outdoors, away from combustible materials, and free of any obstructions that could impede airflow. 

Following these steps will help ensure the dryer operates safely and efficiently.

Step 10: Putty and paint any rough edges.

Once all the surfaces have been sanded, the next step is to putty and paint any rough edges.

By doing this, I will finish the project to a professional standard.

Putty and paint any rough edges.

Using high-quality putty to fill any gaps the sanding may have left is essential. 

Once the putty has dried, it’s time to paint. It is vital to use a primer first and choose the right paint for the job. Once the paint is applied and dried, the project is complete, and the position is to finish. 

This final step is essential to ensure a professional finish, resulting in beautiful work.

Expert Opinion

Hiding a split AC pipe can be a great way to create a clean and pleasant atmosphere in your home. You can efficiently and effectively hide the split AC pipe from view using suitable materials and following the appropriate steps above.

Not only does this help with aesthetics, but it also protects the pipe from potential damage and extends its lifespan. So, use these tips to ensure that your split AC pipe is neatly concealed and give your home a nice finishing touch.

In conclusion, hiding a split AC pipe is a simple and cost-effective way to improve the aesthetics of your home. 

A few DIY solutions can also help reduce noise and vibrations. Taking the time to hide your split AC pipe can make a big difference in your home’s overall look and feel.

Comments are closed.