How to Remove Gutter Spikes without Damaging Gutter

Removing the gutter spikes is part of the maintenance. We all have to do maintenance of the gutter once or twice a month. Gutter spikes become corroded and loose over time, so they should be removed immediately. Many of us feel it difficult and think, what if the gutter gets damaged? No need to stress more.

Today, in this article, we will discuss the steps to help you professionally remove gutter spikes without damaging the gutter. Let’s dive into it.

How to Remove Gutter Spikes without Damaging Gutter

Set up a sturdy ladder on level ground to reach the gutter safely.

So, in the first step, we have to reach the gutter. Its position is higher than a normal height, so you must grab a ladder. You can also use anything other than a ladder that makes you reachable to the gutter. So, place the ladder in the area down to the gutter. You have to place it well so you can’t fall from it.

Wear gloves and safety goggles for protection.

The second step will be safety precautions because safety comes first. So, you must wear gloves and safety goggles for your safety. Gloves protect your hand from getting dirt, while safety goggles protect your eyes. After wearing both, walk through the ladder.

Locate the gutter spike you want to remove.

Now locate and identify the spikes present in the gutter. Identifying the spikes is important because you must identify and make them a target to remove them.

Use a flat pry bar or a similar tool to gently create a gap between the gutter and the fascia board.

Once you identify the gutter spikes and are ready to remove them, use a flat pry bar or a similar tool. This tool will create a gap between the gutter and the fascia board.

Carefully wiggle the spike back and forth to loosen its grip.

Gently move your wiggle forward and backward. This will lose the gutter sprinter grip and will take it up. This step should be performed gently because applying high pressure can damage your gutter.

Once slightly loose, grip the head of the spike with pliers.

After moving it forth and back, sprinkles will start losing the surface and coming up. Once the gutter spikes start, grip it from the head with pliers.

Rotate the spike counterclockwise to unscrew it from the ferrule (tube inside the gutter) and fascia.

When you grip the spike with the head, start rotating. Rotating the spike counterclockwise will unscrew it from the ferrule and fascia.

As it loosens further, gently pull the spike out while rotating it.

Rotation will come up more, making it easier for you to pick. So keep rotating, and pull the spikes as you feel it loose enough. Keep rotating and pulling until all the spikes are taken out. This step should be performed with full attention and ensure no more spikes are there. When you are picking the spikes, keep it all in one place. So it will be easier for you to dispose of them in last.

Check the gutter for any damage or bending; reshape gently with your hands if necessary.

When your gutter is cleaned, then again, look to see no spikes. If there is any damage or bending, immediately fix it with your hands. If it should be done by tool, then grab it. If you can’t handle the damage, seek a professional’s help. Damage should be fixed on the same point; otherwise, it will lead to water damage.

Store or dispose of the removed spike properly and move on to the next spike if needed.

In the last election, don’t leave the mess. Store or dispose of the removed spikes carefully and keep them inside. If you have performed all steps successfully, you can do it again on another property.

My Opinion

Gutter spikes can lead to water damage, so it should be removed on time. Removing spikes is easy if you are guided rightly and perform well. You can remove your gutter spikes after following the above steps. All steps are important so that you can skip any of them. Make sure to wear gloves and safety glasses.

When you finish all the steps, clean all the removed gutter spikes. Remove and leave it open; you have to store them together.