How to Turn on Handheld Shower Head | 9 DIY Steps by Expert

Installing a hand-held shower head can be a great way to make your bathroom more accessible and customize your shower experience. Hand-held shower heads come in different shapes, sizes, and styles and are relatively easy to install. In this blog post, we will go over some crucial steps you need to know how to turn on handheld shower head correctly and safely.

We will provide detailed instructions on turning on the hand-held shower head and some tips and tricks to make the process easier.

We will also go over the various hand-held shower heads available so that you can find the perfect one for your bathroom.

Whether looking for a modern design or something more traditional, you will find what you need to make your bathroom look beautiful and functional.

So, let’s get started and learn how to turn on your hand-held showerhead.

How to Turn on Handheld Shower Head

Step 1: Check if there’s a water supply.

Before turning on your hand-held shower head, ensure a working water supply first.

Check the valves and ensure that the water is running into the shower. If it appears to be a blockage, consult with a plumber to see if there’s an issue with the plumbing system. 

You can proceed to the next step if the water is running correctly.

Step 2: Check if the water heater is working.

After ensuring the water turns on, step two checks if the water heater is working. If the water heater is off, turn it on and let it heat up. 

It is important to note that the temperature of the water from the heater should be warm, not hot.

If the water is too hot, it can cause burns when using the hand-held shower head. If you do not have a water heater, the water will come out at a cool temperature, which is still suitable for use in the shower head.

Step 3: Test the shower head hose and sprayer.

Once you connect the shower head to the arm, you can continue testing the hose and sprayer. 

First, check the hose for any kinks or weak spots that could cause water to leak out.

Then, please turn on the shower head and check the sprayer to ensure it produces an even, powerful spray.

If the sprayer is not creating a mighty stream, it may need to be adjusted or replaced.

Finally, check for any leaks around the shower arm connection. Your new hand-held showerhead is ready to use if all is well!

Step 4: Find out why the shower head isn’t working.

At this point, you should be able to determine why your shower head isn’t working. You may need to replace the shower head if you see any signs of damage or clogging. 

It does get water, but it does not flow correctly. You may need to clean or replace the shower head filter.

Learn More: How To Clean Shower Floor 

If you’re still having trouble with the showerhead, you may want to call a professional plumber.

Step 5: Find out whether you need to replace the hose.

Step 5 is to find out whether you need to replace the hose. If the hose is old and worn out, it may be time to invest in a new one.

You can attach the hand-held shower head to the existing hose if it’s still in good condition.

Check for signs of wear and tear, such as cracks, splits, or breaks in the hose, and if necessary, purchase a replacement hose. 

Make sure to buy a hose compatible with your bathroom’s existing fixtures.

Step 6: Turn on the water supply in the mains.

Now that the hand-held shower head is securely in place, it’s time to turn on the water supply in the mains. First, turn off the main water supply in the house.

You can usually find this shut-off valve near the water heater or outside the home.

Once the main water supply is off, open the valve by turning the handle clockwise until it stops. 

It does allow water to flow back into the house. Finally, turn the main water supply back on, and you should be able to test out your new hand-held shower head!

Step 7: Test the hand-held shower head again.

The seventh step in our process is to test the hand-held shower head again.

To do this, turn the shower on and check if the water pressure is adequate and the temperature is comfortable. If these aspects are good, then congratulations! 

You have successfully turned on your hand-held showerhead.

Step 8: If step 7 doesn’t work, it’s time to replace the hose.

If step 7 doesn’t work, it’s time to replace the hose. You can purchase a new hose from most hardware stores. 

When you go to purchase a new hose, make sure you get one that is compatible with your hand-held shower head. Disconnect the existing hose from the shower head, and then attach the new hose.

After the new hose is attached, turn on the water to check for leaks. If there are no leaks, your shower head should be correctly attached and ready to use.

Step 9: Turn off the water supply in the mains.

Before commencing any plumbing renovation, it is essential to turn off the water supply in the mains. 

It prevents water from running through the pipes during the renovation, which may cause flooding or damage to the plumbing system. 

To turn off the water supply:

• Locate the main shut-off valve near the water heater or outside the house.
• Turn the valve clockwise until it wholly shuts off.
• Contact your local water utility provider for assistance if you are uncertain of the valve’s location. Once the water supply is off, it is safe to begin the plumbing renovation.

Expert Opinion

In conclusion, turning on a hand-held showerhead is a simple task that doesn’t require special tools. 

All you need to do is locate the handle or knob of your shower head, twist it to the desired setting, and enjoy the soothing water of your shower.

You can quickly turn on and adjust your hand-held shower head with some practice.

If you’re looking for an easy way to give yourself a spa-like shower experience, turning on a hand-held showerhead is great.

With a few simple steps and essential tools, you can quickly turn on your hand-held shower head to enjoy the convenience of having a luxury shower experience. 

With a hand-held shower head, you can relax and enjoy a luxurious shower experience in your home.