How to Hide a Pillar in Living Room | 9 Steps Nobody Tells You

Disclaimer

Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. Amazon.com is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

One of the most common design challenges in a living room is the presence of a pillar. Pillars can take up a lot of visual space and make the room feel cluttered and cramped, but you can’t permanently remove them. Let’s learn how to hide a pillar in living room.

Fortunately, there are creative solutions to hiding the pillar and allowing the living room to be the beautiful, comfortable space it always meant. In this blog post, we’ll discuss how you can use various design methods and tricks to make a pillar blend in with the living room’s design or even make it a focal point.

You’ll learn with the Home Affluence team how to use colors, textures, and other elements to create a harmonious living space that doesn’t dominate by an unsightly pillar. In just a few simple steps, you’ll be able to transform the living room and make it feel complete and inviting.

How to Hide a Pillar in Living Room

Step 1: Make Preparation

Before you start hiding your pillar, it is crucial to prepare. Start by measuring the size of the post and the dimensions of the living room. 

Determining the best way to hide the pillar and the materials you need is crucial. 

How to Hide a Pillar in Living Room

You can also measure the surrounding furniture that might interfere with the hiding process. Once done with the measurements, you can start collecting the necessary materials for the job.

Step 2: Finding the correct tools for the job

Step 2 is all about finding the proper tools for the job. You’ll need a drill, screwdriver, hammer, saw, and measuring tape. You may also need a ladder, depending on the height of your pillar. 

How to Hide a Pillar in Living Room

Ensure you have the correct drill bit and screws for the materials you’re working with.

A level is also essential to make sure your pillar is appropriately aligned. Finally, you’ll need a stud finder to locate and mark the wall studs. With all the right tools, you’ll be well on your way to successfully hiding that pillar.

Step 3: Marking where you want to cut

It was marking where you want to cut. Now that you have a rough idea of where to place the pillar, it’s time to mark the area accurately. 

Marking where you want to cut

Make sure to mark it at the point where you want the pillar to cut. Once the main line does mark, use a level and a pencil to draw a line that goes the entire wall length. It does serve as the cutting line.

Step 4: Cutting support beams

After measuring twice and ensuring you have the proper measurements, the next step is cutting support beams to hide the pillar. Use a saw or a power saw to cut two support beams at the desired heights. 

Cutting support beams

Make sure to wear protective gear when cutting the beams. When done, put the support beams into place and ensure they are level with the floor. 

Secure the support beams with screws or nails to hide your pillar.

Step 5: Marking and cutting drywall locations

Once you have determined the pillar size, you can mark the area you need to cut in the drywall.

It does with a pencil or a marker. Measure the width of the pillar, and then use a straight edge to draw a line on the wall that is the same width. 

Marking and cutting drywall locations

Finally, use a drywall saw to cut along the lines. Once you have missed the drywall, you are ready to move on to the next step.

Step 6: Installing drywall on the inside of your room

Installing drywall is the final step in hiding a pillar in the living room within your home. It does essential to take time and ensure the drywall does install correctly. Start by measuring the area to be covered and purchasing the correct amount of drywall. 

Cut the drywall to fit your measurements. Use the right tools when affixing the drywall to the studs, such as drywall screws and a drill. Use a level to ensure the drywall is even. 

Installing drywall on the inside of your room

Tape the joints and apply joint compound to cover any gaps and seams. When complete, sand the joints and seams to create a seamless appearance. 

The drywall will provide a professional and finished look to your new room with proper installation and care.

Step 7: Installing Drywall on the outside of your room

Installing drywall on the outside of a room is a relatively simple task. Begin by measuring the wall and cutting the drywall to the appropriate size. Make sure to leave a gap of about a half inch between the drywall and the wall studs for expansion.

Installing Drywall on the outside of your room

Secure the drywall to the studs with screws, and countersink the screws slightly below the surface. Once the drywall is in place, use drywall tape and joint compound to seal the seams and sand the surface with fine-grit sandpaper.

Finally, if desired, apply a thin layer of primer to the drywall to help protect it from damage and ensure a smooth finish. 

Step 8: Cutting and install beams above your ceiling

Cutting and installing beams above your ceiling is the final step in completing your ceiling’s vaulted design. You must take the time to ensure all measurements are accurate and that the beams do cut to the correct lengths.

Cutting and install beams above your ceiling

Once the beams have been cut and measured, you must secure them and affix them to the ceiling. Be sure to use appropriate hardware and tools to minimize the risk of damage and maintain a high level of safety. 

Consider sealing the beams to protect against moisture build-up and potential rot. With the right tools and planning, you can complete this step confidently, ensuring a long-lasting, attractive vaulted ceiling.

Step 9: Putting up crown molding on the wall’s edges only.

Crown molding is often the finishing touch to a beautifully decorated room. It adds elegance and beauty to any wall and provides a nice transition from one wall to the next.

Putting up crown molding on the wall’s edges only.

To install crown molding, start by measuring the walls and cutting the pieces to fit. Carefully nail the molding into the wall, ensuring it is appropriately positioned and leveled. 

To get the best look, only put crown molding at the edges of the walls, not the entire wall. Crown molding is easy to install and adds a sophisticated touch to any living space.

Expert Opinion

Hiding a pillar in your living room can be a creative way to make the space more open and inviting. Decorating around the pillar, using a mural, or even creating an architectural feature can draw attention away from the post and make it part of the overall design.

With some imagination, you can successfully hide any unsightly pillar in the living room and make your home look more inviting.

It is possible to hide an eyesore like a pillar in your living room with patience and creativity. Whether you cover it with furniture, paint it to match the wall, or build a room divider to camouflage it, you’ll enjoy a more aesthetically pleasing living space. Just remember to take the time to experiment with different solutions and find the one that works best for your home.

Comments are closed.