How to Clean Stone Tile Shower | 4 Simple Ways You Don’t Know Before


Articles, products, and services offered on this site are for informational purposes only. We recommend using caution and seeking professional advice. This site provides general information. We are part of the Amazon Services LLC Associates Program, an affiliate advertising program. is compensated for sales resulting from links on our website.

Please review our disclaimer before taking action based on anything you read or see.

Quite a few people commonly ask themselves how to clean the stone tile shower?

This is very simple if you know how to protect the stone tiles of your shower so that they can keep their condition and their original facade.

They usually come with an extensive selection of colors and patterns that fit a variety of bathroom designs. Steatite, travertine, and granite commonly work better in showers because they are less porous than marble. However, a more complicated part of cleaning a natural stone shower tile tends to keep all the buildup of white and dirty soap scum under control.

How to Clean Stone Tile Shower: Steps

Use Acidic Cleaners

You can use acidic cleaners but although it may seem an acceptable initiative to use acidic cleaners such as vinegar and ammonia to dissolve that buildup of harsh products and hard water deposits. However, these have an extreme pH that will occasionally break some sealer, scratch the stone, and occasionally have the potential to lead to discoloration.

Natural stone must be cleaned at least once a week. This is to have regular deep cleaning and avoid any dirt accumulation by discarding the excess water after each shower.

It is known that every precaution of the stone tile in your shower can protect your facade and sustain its condition intact. So, the right precaution can hold your stone up as a novelty over generations.

Ideally, you should clean most dirt types from your stone tile with a slow detergent, a slow cloth, and a soft cell brush. You can remove stains from stone tiles by identifying the type of stain and using the correct type of regime, such as ammonia, for oil-based stains.

You can hold your stone tile by avoiding acidic and abrasive cleaners and discarding excess moisture from the stone after each shower. In this segment, we will try to contemplate the different types of accessible cleanings and tips for cleaning and sealing a natural stone shower.

Black Diamond Stoneworks MARBLE & TILE FLOOR...
4,237 Reviews
Black Diamond Stoneworks MARBLE & TILE FLOOR...
  • SAFE, for Marble, Limestone, Travertine, Granite, Slate, Ceramic & Porcelain tile.
  • STREAK- FREE CLEAN EVERY TIME! No-rinse Hypoallergenic formula.
  • VERY CONCENTRATED use only 2-4 oz. per gallon of water.

Carry out routine cleaning

It would be best to clean up all the accumulations of loose dirt. A clean cloth should be soaked slowly (one made of microfiber, for example) is not too hot water. Similarly, all shower tiles and the grout in between should be firmly cleaned. This can make it easier to find more serious accumulations and hidden stains.

Read More: How To Waterproof A Shower Without Removing Tiles

Soft cloths are used because they have a moderate impact on the stone finish. The rough cloth may cause the stone area to scratch or fog over time, making it look deadly.

Scrub the grout with a toothbrush and detergent slowly.

Somewhat more exhausting are the narrow grout-filled cracks that are located between the tiles. This is a privileged location for the accumulation of dirt.

In this situation, it is ideal to use a slow detergent (a dishwasher), with not too hot water and a toothbrush to scrub these cracks.

Once this is done, the area must be completely rinsed and the procedure repeated as it is essential until all the grout is clean.

Even though the grout is usually dirtier than the tile itself, it must clean it first to prevent the dirt from spreading to the tile. One very substantial thing is to avoid using recurring cleaners while performing the cleaning of natural stone tiles. Commonly, these products have within them elements that have the possibility of damaging the stone.

Hard cell brushes have the possibility of damaging the finish of the stone and leaving marks. For this reason, it is essential to use only soft bristle brushes and cloths to clean the stone.

How to Clean Stone Tile Shower

Clean the stone with a mild detergent or one formulated for stones

For this step is required to have enough caution, we must bear in mind that not some detergent is good for this kind of stone. This time, we will mix some not very hot water and a few drops of detergent slowly (a dishwasher, for example).

Once this is ready, we must stir the satisfaction to distribute the product. We submerge a cloth slowly in the satisfaction, squeeze the excess liquid, and finally use it to clean the tiles. The tiles must be rinsed continuously while this procedure is executed.

We can find detergents formulated to clean the tiles in the shower in most hardware stores. The acid cleaners have the possibility of damaging the stone tiles. You only have to use tile cleaners with a neutral pH inside (with a value of 7).

All this information must be stated on the product label. Not in all cases, it is preferable to use a larger proportion of detergent.

If there is enough detergent in the satisfaction, it could be in brands.

Cut the detergent foam with an ammonia and water satisfaction

Something more difficult and stressful is the detergent’s lather allows you to get when using it. We understand that detergent foam is a common inconvenience and can be very complicated to remove. Opportunely there are procedures to eradicate it. You can cut that lather using a satisfaction of ½ cup (237 ml) of ammonia and 4 liters (1 gallon) of water.

Once you have this, apply the stone’s satisfaction in the shower with a clean cloth and slowly. And in the same way on all the tiles. A note that is essential that you have present is that the recurrent use of ammonia to clean this stone can adversely affect its facade, making it opaque. It is a requirement to be above the general cleaning to avoid that the detergent’s foam is formed.

Thus, it would help if you only used ammonia with little continuity. Dries the stone after cleaning. Always try to use a tile shower cleaner. And at the same time, avoid leaving cleaners (e.g., ammonia or hydrogen peroxide) on the stone over long cycles.

All of the above solution is main, if they have the possibility of causing transparency or discoloration. Rinse the tiles well and then dry them with a clean towel slowly.

how to clean mold off natural stone shower

How to Clean Stone Tile Shower: FAQs

What do you clean the natural stone tiles with?

The preferable alternative to clean the Natural Stone is water with some soap with a neutral pH, like the dishwasher.

However, it can also be done with water and a little ammonia or water with a little bleach. Ammonia is preferable because it is not an acidic product but a base, and it damages the stone less. Only we should never carry out is to combine ammonia and lye. This catastrophic mixture can create some vapors that have the possibility of being fatal when inhaled.

So, we must clean using a sponge, a slow cloth, or a very soft brush to avoid scratching the area and making circles. After this, we must rinse well and dry quickly with a cloth slowly. If we let it dry in the air, we will undoubtedly have whitish and dull spots.

What is the most remarkable cleaner for a tile shower?

The best thing would be to hold these spaces clean to avoid stains. As we previously mentioned in the article, the most excellent shower cleaner is water with some soap with a neutral pH.

Can you use natural stone tiles in a shower?

One of the most recurrent questions is this.

And yes, in fact, you can use natural stone in a shower. However, it is a requirement that it adhere to stone tiles or gravestones and small grout joints. You are choosing this way a non-slip area for shower floors. And finally, seal the tile regularly, precisely as the supplier of the tiles points out.

Read More: How To Clean Shower Floor

Is baking soda safe for natural stone?

Of course, baking soda has always been one of the special partners for cleaning stone. It is an attractive alternative if you have grease stains.

It is also ideal for helping polish natural stone floors.

How do you seal stone tiles in a shower?

It is required that you use a soft bristle brush. Place penetrating tile sealant on the top face of each tile in a thin covering and suit.

Allow the sealant to dry for two hours or as suggested by the developer. Place a second cover to make a more durable insurance shield on the stone. Finally, allow the sealant to dry according to the standards.


We conclude this segment by saying that there are many ways to hold shower stone tiles clean.

We comment on the correct ways to do this; it is substantial to note that the initiative keeps this space clean. In such a way, it is not going to be primordial to use many elaborated chemicals, and you will maintain much more your stone tile shower.

The showerhead is also a substantial section. Beautiful colors and different textures of natural stone tiles add distinction to shower surfaces. Similarly, mineral creations make the colors of the stone tiles vary from vibrant tones to earthy tones.

Comments are closed.