How to Close Blinds for Privacy | Simple Steps With All Details

You may want some privacy in your home. Closing the blinds may sound like a very simple task. However, it can be quite complicated if you don’t have experience with the specific type of blinds you want to close. Some blinds have cords, some have only a rod, and some have no rod or cord. However, once you identify the type of blinds you want to close and know the correct technique to use, you shouldn’t have too much difficulty. That’s why today we bring you how to close blinds for privacy.

Window blinds for privacy can be a tedious topic for many. However, it is extremely simple. When installing vertical blinds hard to open and close can be a bit of work.

Types of Blinds & How to Close Blinds for Privacy

In today’s market, several types of blinds can help give you some privacy. However, each one has its method to close them. Some tend to be a little hard, especially if a bad installation is made.

The direction, up or down, to close the blinds’ slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out.

Passersby can’t see inside the blinds up: the bent side faces the window, creating less space to see.

With the rounded side facing inward and the blinds down, it is easier for prying eyes to see into the room at night, especially when it is lit from the inside.

How to Close Blinds for Privacy

Some of the best blinds are:

Single cord blinds

  • Pull the cord to the left to release the blinds.
  • Hold the cord firmly and then pull it across the front of the window at a 45-degree angle.
  • You may also need to pull the cable slightly to release the blinds.
  • Venetian blinds, micro blinds, mini blinds, pleated shades, and cellular shades are usually single cord systems.

Release the cord slowly to close the blind.

When unlocking the blind, continue to hold the cord to the left side. From there, gradually loosen the grip to raise it slowly.

  • Be sure to continue holding the cable to the left, or the louvers may lock into place.
  • Going slow will prevent the cable from snagging on the safety system.

Lower both cord ropes at the same time to keep the level of the blinds

  • If the blinds become twisted when lowered, pull down only 1 of the two cords to make them level again.
  • If the two sides become even more uneven, try pulling the other cord.

Secure the blinds in place by pulling the cord to the right

Once the blinds are where you want them, hold the cord firmly to prevent them from going any higher.

Then, pull the cord to the right of the window to lock the shades in place.

  •  Release the cord slowly to make sure the shades are securely closed.

Continuous cord blinds

Check to see if the blinds operate with a continuous cord loop.

You have to look for a cable that looks like a loop.

If it is a continuous cord system, the blinds should raise or lower evenly when pulling on one side of the cord loop.

  • The length of a continuous cord loop will not change as you raise and lower the blinds.
  •  Roman shades and Venetian blinds often have continuous cord loops.
  •  Pull-on one side of the cord to lower the blinds. If pulling from this place, the curtain rises, pull from the other side. Stop pulling when the blinds reach the desired level.

Turn the rod on the other side of the window to adjust the slats.

If your blind set has adjustable slats, you can open and close them by turning the rod hanging from the top of the window.

Turn the rod to the right or left to move them.

  •  Not all blinds will have adjustable slats.

Blinds with rods

Slide the rod to move the blinds from side to side

Some vertical and panel blinds are operated with a rod-and-rail mechanism rather than a cable system.

To control this type, pull the bar in the direction you want the blind to move.

The bar is usually located at the end of the grids.

  • People can control some vertical and panel blinds with a single cord or continuous cord system.

Turn the rod to rotate the louvers. Many vertical curtains are turned with a rod. Turn the rod counterclockwise to start. If the louvers do not start to close, turn the rod in the opposite direction.

Check the track system for obstructions if the louvers do not move.

The rail is located at the top of the window or door.

Stand on a stable chair or ladder to reach the track system. Then, remove any obstructions you see.

Wireless Blinds

To lower the cordless blinds, pull down on the bottom bar. 

Grasp the center of the bottom bar and gently pull downward. If the louvers are where you want them, release them, and the blinds will stay in place.

  •  You may have to press a button or a latch on the bottom bar to release the louvers on some models.

Tilt the lower rod down to rotate the curtain slats without wires.

If your blinds do not have a rod, you may be able to adjust the angle of the slats with the bottom bar. However, not all models of cordless blinds can operate in this manner.

Close motorized blinds with remote control

Special controls for electric blinds depend on the brand and type of manufacturer. 

On most models, you can close the shades by pressing a down arrow or a button that says “close.”

Consult your owner’s manual if you are unsure how to operate your shades.

  • If the remote control does not respond, try changing the batteries.
  • Also, you can operate the blinds with an App on your Smartphone or a smart home device on certain mechanized models.

What Other Types of Blinds give me Privacy?

Venetian blinds privacy

Venetian blinds

Graduated blinds are a fantastic alternative to achieve privacy.

The rotating slat design allows you to adjust the blinds to let daylight in and block the direct sight of your home.

This means that you can get privacy with your Venetian privacy blinds during the day without blocking light and having to overuse artificial lights.

Venetian blinds are made of different materials to be adapted to all rooms of the house.

All material options, including wood, metal, and PVC, are efficient at blocking out light, meaning that at night with the blinds fully closed, no one will be able to see inside your home.

Vertical blinds

Vertical blinds installation is a must nowadays. These blinds have privacy-enhancing properties similar to Venetian blinds due to their slat design.

Vertically hanging slats can have good light control while preventing a clear line of sight into your property.

Vertical blinds are especially useful for large, long windows, sliding doors, and conservatories.

However, the materials used are often not completely opaque, which means that some light can still escape at night.

This makes it an ideal choice of window blinds for privacy.

Roller Blinds

For total privacy, roller blinds made of opaque fabric are a good choice, especially for the powder room window.

The blackout quality will ensure minimal light infiltration, and no one can see through your home window curtain on nights.

These types of blinds are ideal, especially if you want blinds for privacy at night.

Also, some people can use roller blinds in any room of the house as it is one of the best for user data privacy. These blinds are available in a wide range of designs, colors, and patterns, so there is plenty of customization scope.

Roman Blinds

This type of window blinds is a softer and more luxurious option. Roman shades are also a good choice for maintaining privacy.

Depending on your personal preferences, Roman shades can enhance privacy in different ways.

First, you can opt for a rich, fully lined fabric Roman shade that will serve to block the view of your home completely.

Alternatively, Roman shades can be designed in layers.

This option generally consists of a thin, airy fabric that can be pulled down during the day to prevent a clear view of your home but still let in the daylight.

In addition to this, another thicker layer can be pulled down when you want to create complete privacy. What makes it one of the best shutters for privacy?

Position for summer

The position in which you position window shades also affects energy efficiency in the home.

With blinds tilted up and the rounded side out, the room’s heat moves toward the ceiling, a better position for blinds in the summer.

This position helps reduce energy bills when you keep the shades closed during summer days.

Winter weather

In winter, when the sun appears, open the shades to let sunlight into the room or position them so that the rounded side faces the room to move the warmer air from the ceiling closer to where it is needed.

With the shades facing up, outside sunlight and radiant energy are deflected skyward, and heat is directed away from the room’s living spaces. This helps losing heat, and also cold weather effects.

Mounting position

Shades installed inside the window frame provide more heat in the winter than when mounted outside the window frame.

With the shades inside the window and closed, an air cushion is created between the shades and the windows, which adds a slight insulating factor.

It keeps the cooler air against the window. But it uses less conditioned air when the shutters are installed on the outside of the frame because less solar energy penetrates the room.

At the end of the test, the fixing position and your shutters’ slat position depend on whether you live in a warm or cold climate, in the city, the suburbs, or the country. We can reduce 25% heat loss, BTW.

Some more facts about Blinds

  • Approximately 30 percent of the heating energy of a house is lost through walls.
  • Around 76 percent of sunlight, which falls on standard double-pane windows, enters to become heat in cooling seasons.
  • Not all window coverings are operable, but one study found that 75% of residential window coverings stay in the same place every day, of those that are.
  • Tightly mounted cellular shades will minimize heat loss by windows by 40 percent or more in heating seasons, equating to around 20 percent savings in heating oil.
  • Cellular shades can minimize excessive solar heat through windows by up to 80 percent during cooling seasons, reducing the total solar benefit when built with a tight fit to 15 percent or less.
  • Studies suggest that medium-colored draperies with white-plastic backings will minimize the 33 percent rise in heat.

How to Close Blinds for Privacy: FAQs

What is the proper way to close blinds?

If the window is on the first floor, the shutter should be closed with slats. Otherwise, people can see in from the upper floors.

However, if it is on an upper floor and the slats are raised, anyone can see from the first floor. For that reason, blinds on the upper floor should close the slats.

What are the best blinds for privacy?

  • Blackout blinds
  • Venetian blinds privacy
  • Roman blinds.
  • Plantation shutters.

Can you see through vertical blinds at night?

Yes, but there’s more. As the light is brighter outside, these blinds allow you to look outside but do not let others see inside the house at night. However, these shades work the other way around.

Conclusion

Window slats for daytime and nighttime privacy, which are delicate window treatments. Skewed slats, a tangled pull cord, and poor pulling technique can make closing the shades quite complicated.

The perfect window treatment includes ease of opening your window and, without a doubt, privacy.

Today, Blinds for Privacy are often the best thing you can have to keep intruders’ eyes away from you. However, among the many options you have, you cannot forget the horizontal window blinds.

Follow the steps we have outlined in this guide, and you will be able to operate your window blinds with ease for privacy in your home.

Read More: How To Take Down Levolor Blinds

Comments are closed.

buy cialis online cialis online